# gSender **URL:** https://forum.sienci.com/c/gsender/14.md?page=5 [Latest](https://forum.sienci.com/latest.md) · [Categories](https://forum.sienci.com/categories.md) **Page:** 6 --- ## [Normal jogging speed constantly changes](https://forum.sienci.com/t/normal-jogging-speed-constantly-changes/21949)
**Author:** [@Strst](https://forum.sienci.com/u/Strst)\ **Replies:** 13\ **Last updated:** [April 10, 2026, 3:01pm UTC](https://forum.sienci.com/t/normal-jogging-speed-constantly-changes/21949 "2026-04-10T15:01:45Z")
Every time I home my Altmill the speed on the normal is extremely slow when I go to jog it. I have to go into settings and reset it every time. Any solution to this problem? --- ## [Error 60 on sd card](https://forum.sienci.com/t/error-60-on-sd-card/26017)
**Author:** [@WillW](https://forum.sienci.com/u/WillW)\ **Replies:** 9\ **Last updated:** [April 10, 2026, 2:48pm UTC](https://forum.sienci.com/t/error-60-on-sd-card/26017 "2026-04-10T14:48:21Z")
Running gsender 1.6.0-Edge-4 and trying to use sd card. I get error 60 sd card mount failed. Brand new SanDisk 32 GB and it is a fat 32 format. Any settings or information would be helpfull. --- ## [No dialog box on tool change?](https://forum.sienci.com/t/no-dialog-box-on-tool-change/22070)
**Author:** [@jayem1427](https://forum.sienci.com/u/jayem1427)\ **Replies:** 6\ **Last updated:** [April 10, 2026, 2:14pm UTC](https://forum.sienci.com/t/no-dialog-box-on-tool-change/22070 "2026-04-10T14:14:20Z")
Trying to configure my tool setter on my DIY CNC running grblHal. For some reason, when I run the M6 command I never see a dialog box. None of the tool probing options change this behavior, I’m using V1.55 and also tried… --- ## [Problems with zero location](https://forum.sienci.com/t/problems-with-zero-location/25448)
**Author:** [@mhforbes](https://forum.sienci.com/u/mhforbes)\ **Replies:** 4\ **Last updated:** [April 10, 2026, 1:59pm UTC](https://forum.sienci.com/t/problems-with-zero-location/25448 "2026-04-10T13:59:43Z")
I am having a repeat issue with my zeros relocating immediately on running a roughing pass (attaching gcode). This is a new issue, and I am not clear what I may be doing wrong. Longmill MK2 with SLB, gsender 1.57. I a… --- ## [Add status of cut to bottom of window](https://forum.sienci.com/t/add-status-of-cut-to-bottom-of-window/26078)
**Author:** [@billp99](https://forum.sienci.com/u/billp99)\ **Replies:** 2\ **Last updated:** [April 9, 2026, 7:19pm UTC](https://forum.sienci.com/t/add-status-of-cut-to-bottom-of-window/26078 "2026-04-09T19:19:28Z")
First off, gSender is GREAT. Just moved from UGS and it is so much better. MINOR suggestion. I am often editing other designs during a cut. I had the UGS window underneath, but with the bottom right peaking out so I co… --- ## [Issues with a axis & y axis](https://forum.sienci.com/t/issues-with-a-axis-y-axis/24713)
**Author:** [@PS3Pupil](https://forum.sienci.com/u/PS3Pupil)\ **Replies:** 9\ **Last updated:** [April 9, 2026, 7:11pm UTC](https://forum.sienci.com/t/issues-with-a-axis-y-axis/24713 "2026-04-09T19:11:02Z")
Hi, very new to all this I have a Twotrees 450 Ultra cnc with a 4th / rotary axis I have set gSender up to be able to use the rotary axis, but when I send the Gcode to the cnc, it moves the y axis. If I type the Gcode … --- ## [Suggestion and report](https://forum.sienci.com/t/suggestion-and-report/21249)
**Author:** [@wb8eye](https://forum.sienci.com/u/wb8eye)\ **Replies:** 4\ **Last updated:** [April 9, 2026, 6:38pm UTC](https://forum.sienci.com/t/suggestion-and-report/21249 "2026-04-09T18:38:03Z")
1: The file displayed in the visualizer will disappear when changing view angle but the stylus stays and moves with the cut. Is the file image painted in memory only once? 2: It would be handy if the line number was add… --- ## [Add soft limit checks on X and Y when probing](https://forum.sienci.com/t/add-soft-limit-checks-on-x-and-y-when-probing/25792)
**Author:** [@reidcustoms](https://forum.sienci.com/u/reidcustoms)\ **Replies:** 30\ **Last updated:** [April 9, 2026, 6:19pm UTC](https://forum.sienci.com/t/add-soft-limit-checks-on-x-and-y-when-probing/25792 "2026-04-09T18:19:19Z")
Hey, Has been working perfectly up until tonight, I zero off the corner of my waste board (lower left). I set the plate in, set XYZ auto, and it touches off at Z then fails immediately as it trys to touch the left side… --- ## [Door Error in gsender](https://forum.sienci.com/t/door-error-in-gsender/26055)
**Author:** [@Robo](https://forum.sienci.com/u/Robo)\ **Replies:** 9\ **Last updated:** [April 9, 2026, 6:01pm UTC](https://forum.sienci.com/t/door-error-in-gsender/26055 "2026-04-09T18:01:25Z")
I am trying to surface a cylinder and gsender will start, then within 3 secs stops with “Door” error Has anyone else had this issue? --- ## [Weird stuff happening - delays](https://forum.sienci.com/t/weird-stuff-happening-delays/21950)
**Author:** [@Jens](https://forum.sienci.com/u/Jens)\ **Replies:** 21\ **Last updated:** [April 9, 2026, 5:23pm UTC](https://forum.sienci.com/t/weird-stuff-happening-delays/21950 "2026-04-09T17:23:18Z")
I am not expecting a solution to the following but thought I would post it here as a matter of record …. Today I was running a lengthy surfacing operation. The operation finished fine and gSender seemed to be ready for … --- ## [Deduce surfacing size using current position](https://forum.sienci.com/t/deduce-surfacing-size-using-current-position/15066)
**Author:** [@\_Michael](https://forum.sienci.com/u/_Michael)\ **Replies:** 4\ **Last updated:** [September 5, 2025, 10:52pm UTC](https://forum.sienci.com/t/deduce-surfacing-size-using-current-position/15066 "2025-09-05T22:52:03Z")
It’s time to resurface my spoil board and I had and idea! It would be nice if you could zero the X and Y and then jog to the opposing corner and gSender could deduce the size based on the current X and Y position. It mi… --- ## [AutoZero Touchplate issues](https://forum.sienci.com/t/autozero-touchplate-issues/25614)
**Author:** [@brewpickles](https://forum.sienci.com/u/brewpickles)\ **Replies:** 5\ **Last updated:** [April 9, 2026, 3:31pm UTC](https://forum.sienci.com/t/autozero-touchplate-issues/25614 "2026-04-09T15:31:53Z")
I purchased a SuperLongBoard in January 2025 just now getting around to installing it on my MK2 along with a RattMMotor 2.2KW spindle. I’m having some weird issues with the AutoZero Touchplate. When it finishes the rou… --- ## [Auto Tool Change Routine](https://forum.sienci.com/t/auto-tool-change-routine/25489)
**Author:** [@scuba14c](https://forum.sienci.com/u/scuba14c)\ **Replies:** 1\ **Last updated:** [April 9, 2026, 2:50pm UTC](https://forum.sienci.com/t/auto-tool-change-routine/25489 "2026-04-09T14:50:08Z")
I am trying to figure out a way to treat a XYZ probe as an initial tool through the built in tool setter function that comes up with an M6 command before my gcode is loaded. My intention is to use the XYZ probe to probe… --- ## [My test run of 1.6.0 Edge 5](https://forum.sienci.com/t/my-test-run-of-1-6-0-edge-5/26057)
**Author:** [@Justfrfun](https://forum.sienci.com/u/Justfrfun)\ **Replies:** 1\ **Last updated:** [April 8, 2026, 8:14pm UTC](https://forum.sienci.com/t/my-test-run-of-1-6-0-edge-5/26057 "2026-04-08T20:14:18Z")
I gave 1.6.0 Edge 5 a test run today. I like that the display in dark mode is better and that everything fits on one page. Some of the new features and setup is nice, I really like it overall. I did experience some issue… --- ## [Toolsetter workflow halts](https://forum.sienci.com/t/toolsetter-workflow-halts/25956)
**Author:** [@Folkert](https://forum.sienci.com/u/Folkert)\ **Replies:** 1\ **Last updated:** [April 8, 2026, 6:51pm UTC](https://forum.sienci.com/t/toolsetter-workflow-halts/25956 "2026-04-08T18:51:51Z")
When changing tools, the toolsetter workflow buttons cannot be clicked. This is only possible after minimizing the panel and opening it again. Code works fine with Gsender, only show this when using Gsender Edge. Runn… --- ## [Building gSender](https://forum.sienci.com/t/building-gsender/15464)
**Author:** [@\_Michael](https://forum.sienci.com/u/_Michael)\ **Replies:** 35\ **Last updated:** [April 8, 2026, 4:02pm UTC](https://forum.sienci.com/t/building-gsender/15464 "2026-04-08T16:02:12Z")
If I remember correctly someone said that maybe build directions would be added at some point. I only have have a little experience with JS but if I could build gSender it might encourage me to learn more as I’d have a … --- ## [Configurable Spindle Delay when "Starting from Line"](https://forum.sienci.com/t/configurable-spindle-delay-when-starting-from-line/26137)
**Author:** [@Thiago](https://forum.sienci.com/u/Thiago)\ **Replies:** 2\ **Last updated:** [April 8, 2026, 3:47pm UTC](https://forum.sienci.com/t/configurable-spindle-delay-when-starting-from-line/26137 "2026-04-08T15:47:59Z")
Currently, when using the “Start from Line” feature, gSender initiates the spindle and axis movement simultaneously. This can lead to tool breakage or material damage if the spindle hasn’t reached its target RPM before t… --- ## [Unified, Responsive, and "Zero-Config" Remote Pendant Mode](https://forum.sienci.com/t/unified-responsive-and-zero-config-remote-pendant-mode/26134)
**Author:** [@Thiago](https://forum.sienci.com/u/Thiago)\ **Replies:** 0\ **Last updated:** [April 8, 2026, 12:08pm UTC](https://forum.sienci.com/t/unified-responsive-and-zero-config-remote-pendant-mode/26134 "2026-04-08T12:08:09Z")
The Goal: I would like to suggest a major overhaul of the gSender Pendant functionality to make it a more seamless extension of the desktop software, rather than a separate interface that requires independent configurat… --- ## [gSender will not connect to my IP address](https://forum.sienci.com/t/gsender-will-not-connect-to-my-ip-address/25925)
**Author:** [@RonC](https://forum.sienci.com/u/RonC)\ **Replies:** 5\ **Last updated:** [April 6, 2026, 9:26pm UTC](https://forum.sienci.com/t/gsender-will-not-connect-to-my-ip-address/25925 "2026-04-06T21:26:14Z")
I have programmed an ESP01 with a serial to WIFI program, port 23. My IP address is 192.168.1.103, port 23. When I try to set the IP address in gSender 1.5.7, I am presented with a list of preset IP addresses, and I am … --- ## [Surfacing tool using G54 co-ordinates](https://forum.sienci.com/t/surfacing-tool-using-g54-co-ordinates/21805)
**Author:** [@Charlie2](https://forum.sienci.com/u/Charlie2)\ **Replies:** 5\ **Last updated:** [April 6, 2026, 9:20pm UTC](https://forum.sienci.com/t/surfacing-tool-using-g54-co-ordinates/21805 "2026-04-06T21:20:44Z")
I Have encountered an issue with the surfacing tool I have zeroed the job on G55 co-ordinate offset. Set the dimensions for the surfacing tool path ran the outline everything ok. press run machine then heads off to … --- ## [Well opps... gsender will not come back on line](https://forum.sienci.com/t/well-opps-gsender-will-not-come-back-on-line/25986)
**Author:** [@mborgardt](https://forum.sienci.com/u/mborgardt)\ **Replies:** 4\ **Last updated:** [April 6, 2026, 9:12pm UTC](https://forum.sienci.com/t/well-opps-gsender-will-not-come-back-on-line/25986 "2026-04-06T21:12:58Z")
Ever since I enabled wireless control, the software will not fire up, or at least it does not look to be doing this, even after I reinstalled gsender… Any thoughts --- ## [Stream dock for control](https://forum.sienci.com/t/stream-dock-for-control/26011)
**Author:** [@Busthh](https://forum.sienci.com/u/Busthh)\ **Replies:** 1\ **Last updated:** [April 6, 2026, 9:05pm UTC](https://forum.sienci.com/t/stream-dock-for-control/26011 "2026-04-06T21:05:12Z")
Has anyone tried stream dock as a controlbox for jogging, They can config Logitech gamepad and xbox controller. Why not a way to configure a stream dock ( elgato) --- ## [Probe stopped working](https://forum.sienci.com/t/probe-stopped-working/22124)
**Author:** [@Donavanshomes](https://forum.sienci.com/u/Donavanshomes)\ **Replies:** 3\ **Last updated:** [April 6, 2026, 9:00pm UTC](https://forum.sienci.com/t/probe-stopped-working/22124 "2026-04-06T21:00:51Z")
Recently my probe stopped working when I go to start a probe it shows green on the display screen like you made contact, as soon as the window is opened without touching the prob to the bit but the board light isn’t on. … --- ## [Macros disappeared from page](https://forum.sienci.com/t/macros-disappeared-from-page/26079)
**Author:** [@scottwhisler](https://forum.sienci.com/u/scottwhisler)\ **Replies:** 3\ **Last updated:** [April 6, 2026, 8:53pm UTC](https://forum.sienci.com/t/macros-disappeared-from-page/26079 "2026-04-06T20:53:51Z")
Hello all, I have been happily using my AltMill for a month or so. Yesterday when I turned the machine on, my macros (about 12 of them) were gone. None of them were overly complex, so I wasn’t too worried about it, bu… --- ## [gSender corner buttons move to negative coordinates (Soft limit error)](https://forum.sienci.com/t/gsender-corner-buttons-move-to-negative-coordinates-soft-limit-error/26087)
**Author:** [@ramiux3](https://forum.sienci.com/u/ramiux3)\ **Replies:** 3\ **Last updated:** [April 6, 2026, 8:47pm UTC](https://forum.sienci.com/t/gsender-corner-buttons-move-to-negative-coordinates-soft-limit-error/26087 "2026-04-06T20:47:51Z")
Hi, I’m using FluidNC (V4.9 controller) with soft limits enabled and machine coordinates set correctly. My machine homes to front-left (X0 Y0) and everything works fine: Homing works Jogging works Manual G53 c… --- ## [Profile tool path when doing live cut not following tool path](https://forum.sienci.com/t/profile-tool-path-when-doing-live-cut-not-following-tool-path/26101)
**Author:** [@michaelmacd](https://forum.sienci.com/u/michaelmacd)\ **Replies:** 3\ **Last updated:** [April 6, 2026, 4:02pm UTC](https://forum.sienci.com/t/profile-tool-path-when-doing-live-cut-not-following-tool-path/26101 "2026-04-06T16:02:38Z")
Not sure if this is a hardware or software issue. I am cutting a plaque and all my cuts are great until i get to the profile cut which cuts off the excess wood from project. It starts out following the toolpath and befor… --- ## [Macro administration](https://forum.sienci.com/t/macro-administration/25572)
**Author:** [@gwilki](https://forum.sienci.com/u/gwilki)\ **Replies:** 3\ **Last updated:** [April 2, 2026, 7:17pm UTC](https://forum.sienci.com/t/macro-administration/25572 "2026-04-02T19:17:47Z")
Over the years, I’ve gone back and forth with my issues with macro administration. In brief, those issues included: deleting a macro from the macro list did not delete the associated keyboard shortcut from the shortcut… --- ## [Mathematical macros](https://forum.sienci.com/t/mathematical-macros/26040)
**Author:** [@scottwhisler](https://forum.sienci.com/u/scottwhisler)\ **Replies:** 6\ **Last updated:** [April 2, 2026, 1:04am UTC](https://forum.sienci.com/t/mathematical-macros/26040 "2026-04-02T01:04:56Z")
Does Gsender not allow mathematical macros? for instance, this bolt circle macro: If not, how are people working around this? --- ## [BitSetter and other tool length sensors supported in gSender](https://forum.sienci.com/t/bitsetter-and-other-tool-length-sensors-supported-in-gsender/3877)
**Author:** [@geoffburtner](https://forum.sienci.com/u/geoffburtner)\ **Replies:** 53\ **Last updated:** [March 29, 2026, 4:32pm UTC](https://forum.sienci.com/t/bitsetter-and-other-tool-length-sensors-supported-in-gsender/3877 "2026-03-29T16:32:06Z")
Can anyone point me to information on using a tool height/offset probe for tool changing? I have a Shapeoko 3 with the BitSetter and I’m going to try setting up gSender instead of Carbide Motion…but glancing through the … --- ## [NymoLabs Wireless touch probe delay](https://forum.sienci.com/t/nymolabs-wireless-touch-probe-delay/25181)
**Author:** [@pioneerko](https://forum.sienci.com/u/pioneerko)\ **Replies:** 10\ **Last updated:** [March 27, 2026, 1:48am UTC](https://forum.sienci.com/t/nymolabs-wireless-touch-probe-delay/25181 "2026-03-27T01:48:58Z")
After installing and connecting NymoLabs probe Im getting ERROR: Probe fail. Probe is not in the expected initial state before starting probe cycle when G38.2 and G38.3 is not triggered and G38.4 and G38.5 is triggered… [Previous page](https://forum.sienci.com/c/gsender/14.md?page=4) [Next page](https://forum.sienci.com/c/gsender/14.md?page=6)