# 3D Printed Leveling Feet
**URL:** https://forum.sienci.com/t/3d-printed-leveling-feet/27026
**Category:** 🧰 CNC Setup
**Created:** [August 31, 2026, 7:48pm UTC](https://forum.sienci.com/t/3d-printed-leveling-feet/27026 "2026-08-31T19:48:13Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@\_Michael](https://forum.sienci.com/u/_Michael)
#### Post date: [August 31, 2026, 7:48pm UTC](https://forum.sienci.com/t/3d-printed-leveling-feet/27026/1 "2026-08-31T19:48:14Z")
I made some leveling feet for my table. It’s been awhile and they haven’t broken yet so I thought I’d share.
They are sized to bolt onto a 2x4 with 1/4 20 nuts and bolts. I used PETG with a 0.6mm nozzle. 4 walls, 6 top and bottom, 0.3 layer height and 25% infill.
This zip file has a single 3mf in it.
[leveling\_feet.zip](https://forum.sienci.com/uploads/short-url/oiQpYcQKMBKR7BpYMslPsFl3kDz.zip) (392.4 KB)
My legs are made from two 2x4’s fastened in an L shape. These fit nicely in that shape.
---
### Author:  [@ozguzzi](https://forum.sienci.com/u/ozguzzi)
#### Post date: [September 1, 2026, 1:40pm UTC](https://forum.sienci.com/t/3d-printed-leveling-feet/27026/2 "2026-09-01T13:40:24Z")
Thank you Michael, just what I needed for my LongMill MK1. I moved a 1,000 miles and had to make a new table for it.
---
### Author:  [@qsligh](https://forum.sienci.com/u/qsligh)
#### Post date: [September 6, 2026, 5:44pm UTC](https://forum.sienci.com/t/3d-printed-leveling-feet/27026/3 "2026-09-06T17:44:22Z")
Thanks Mike, haven’t received my unit, but I’m sure they’ll come in handy when it arrives!