# A-Axis adjustment

**URL:** <https://forum.sienci.com/t/a-axis-adjustment/10081>\
**Category:** 🌀 Rotary Axis\
**Created:** [October 18, 2023, 7:40pm UTC](https://forum.sienci.com/t/a-axis-adjustment/10081 "2023-10-18T19:40:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jpnharris](https://forum.sienci.com/letter_avatar_proxy/v4/letter/j/bbce88/32.png) [@jpnharris](https://forum.sienci.com/u/jpnharris)\
**Post date:** [October 18, 2023, 7:40pm UTC](https://forum.sienci.com/t/a-axis-adjustment/10081/1 "2023-10-18T19:40:31Z")

</div>

I am getting many actual rotations for what should be one only one rotation. Where is the calibration or adjustment for this? A 30 degree input equates to 270 degrees of actual rotation. This is making the rotational speed very high, faster than my bit wants to cut.

---

<div class="post-metadata">

**Author:** ![Bduva002](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/51bf81/32.png) [@Bduva002](https://forum.sienci.com/u/Bduva002)\
**Post date:** [November 15, 2023, 4:32am UTC](https://forum.sienci.com/t/a-axis-adjustment/10081/2 "2023-11-15T04:32:48Z")

</div>

I am wondering the same thing. I see in gsender when you click rotary mode the $101 param is suposed to update to give the proper steps/distance. Can we just update $101 via the terminal manually? I think this would then require manually changing it back comeing out of rotary mode.

---

<div class="post-metadata">

**Author:** ![jpnharris](https://forum.sienci.com/letter_avatar_proxy/v4/letter/j/bbce88/32.png) [@jpnharris](https://forum.sienci.com/u/jpnharris)\
**Post date:** [November 16, 2023, 2:04am UTC](https://forum.sienci.com/t/a-axis-adjustment/10081/3 "2023-11-16T02:04:17Z")

</div>

My issue was solved by updating to gSender Edge 1.3.6. Was using 1.3.4