# A stable Mill One without 3d printed parts

**URL:** <https://forum.sienci.com/t/a-stable-mill-one-without-3d-printed-parts/3605>\
**Category:** 🧰 CNC Setup\
**Created:** [September 3, 2021, 5:24am UTC](https://forum.sienci.com/t/a-stable-mill-one-without-3d-printed-parts/3605 "2021-09-03T05:24:06Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dharmesh](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/58956e/32.png) [@Dharmesh](https://forum.sienci.com/u/Dharmesh)\
**Post date:** [September 3, 2021, 5:24am UTC](https://forum.sienci.com/t/a-stable-mill-one-without-3d-printed-parts/3605/1 "2021-09-03T05:24:06Z")

</div>

Hi, everyone I have been following up on the Sienci designs from a while and want to build a LongMill from scratch. In the process, I realised they had a smaller desktop Mill before and couldn’t wait to build that first. Really liked the design so I went ahead and modified it in a way that I got rid of almost all the 3d printed parts. The only 3d printed parts on my MillOne would be the ACME nut holders. It’s a start, hoping all goes well.

 ![IMG_0024](https://forum.sienci.com/uploads/default/original/2X/2/2e4030ecaffd382b765b8feebc8af23c2d034375.jpeg)

---

<div class="post-metadata">

**Author:** ![Dharmesh](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/58956e/32.png) [@Dharmesh](https://forum.sienci.com/u/Dharmesh)\
**Post date:** [September 23, 2021, 6:15am UTC](https://forum.sienci.com/t/a-stable-mill-one-without-3d-printed-parts/3605/2 "2021-09-23T06:15:43Z")

</div>

And some progress, motors, lead screws, gantries installed and it moves but with a lot of noise. But yeah no 3d printed parts. Looks clean

[https://photos.app.goo.gl/pPuzbZ9rsaseSoPF6](https://photos.app.goo.gl/pPuzbZ9rsaseSoPF6)

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [September 23, 2021, 11:48am UTC](https://forum.sienci.com/t/a-stable-mill-one-without-3d-printed-parts/3605/3 "2021-09-23T11:48:55Z")

</div>

@Dharmesh I missed your first post, Dharmesh. Welcome to the group. You bring a different perspective to it. Please keep posting your progress reports.

Your build is really looking good. 😀 Why do you suppose it is so noisy? (no offence intended)

---

<div class="post-metadata">

**Author:** ![Dharmesh](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/58956e/32.png) [@Dharmesh](https://forum.sienci.com/u/Dharmesh)\
**Post date:** [September 23, 2021, 12:10pm UTC](https://forum.sienci.com/t/a-stable-mill-one-without-3d-printed-parts/3605/4 "2021-09-23T12:10:33Z")

</div>

It’s noisy because the motors directly mount/touch the side panels and so do the aluminium rails. Maybe the 3d printed part in the original design acts as a damper. I would offset the motor with spacers and check how much it affects.

---

<div class="post-metadata">

**Author:** ![Dharmesh](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/58956e/32.png) [@Dharmesh](https://forum.sienci.com/u/Dharmesh)\
**Post date:** [October 21, 2021, 9:42am UTC](https://forum.sienci.com/t/a-stable-mill-one-without-3d-printed-parts/3605/5 "2021-10-21T09:42:32Z")

</div>

And some more progress. Mechanical assembly completed without 3d printed parts. Very rigid.

 ![image](https://forum.sienci.com/uploads/default/original/2X/c/c021e825398abd8050e5cd829ab3c95f53db07f0.jpeg)
