# Altmill is there anyone in the Wisconsin area that has a altmill and can help me set up a couple of things on gsender touch plate and homing my machine **URL:** \ **Category:** šŸ“„ General\ **Created:** [August 31, 2026, 9:54pm UTC](https://forum.sienci.com/t/altmill-is-there-anyone-in-the-wisconsin-area-that-has-a-altmill-and-can-help-me-set-up-a-couple-of-things-on-gsender-touch-plate-and-homing-my-machine/27027 "2026-08-31T21:54:22Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![lonsdorf83](https://forum.sienci.com/letter_avatar_proxy/v4/letter/l/9de0a6/32.png) [@lonsdorf83](https://forum.sienci.com/u/lonsdorf83)\ **Post date:** [August 31, 2026, 9:54pm UTC](https://forum.sienci.com/t/altmill-is-there-anyone-in-the-wisconsin-area-that-has-a-altmill-and-can-help-me-set-up-a-couple-of-things-on-gsender-touch-plate-and-homing-my-machine/27027/1 "2026-08-31T21:54:23Z")
Is there anyone in Wisconsin area that has a altmill 4x4 and can help me with a couple of things to set up in gsender touch plate and homing my machine ---
**Author:** ![Ourbudd](https://forum.sienci.com/letter_avatar_proxy/v4/letter/o/d2c977/32.png) [@Ourbudd](https://forum.sienci.com/u/Ourbudd)\ **Post date:** [September 1, 2026, 1:28am UTC](https://forum.sienci.com/t/altmill-is-there-anyone-in-the-wisconsin-area-that-has-a-altmill-and-can-help-me-set-up-a-couple-of-things-on-gsender-touch-plate-and-homing-my-machine/27027/2 "2026-09-01T01:28:10Z")
What part of Wisconsin are you in? Iā€™m in SE Kenosha area. Still learning but may be able to help some? ---
**Author:** ![Groucho194](https://forum.sienci.com/letter_avatar_proxy/v4/letter/g/ba9def/32.png) [@Groucho194](https://forum.sienci.com/u/Groucho194)\ **Post date:** [September 6, 2026, 5:32pm UTC](https://forum.sienci.com/t/altmill-is-there-anyone-in-the-wisconsin-area-that-has-a-altmill-and-can-help-me-set-up-a-couple-of-things-on-gsender-touch-plate-and-homing-my-machine/27027/3 "2026-09-06T17:32:41Z")
Good morning. I am in Black River Falls WI. 2 hrs to Wausau, 45 minutes to La Cross or Eau Claire. ---
**Author:** ![lonsdorf83](https://forum.sienci.com/letter_avatar_proxy/v4/letter/l/9de0a6/32.png) [@lonsdorf83](https://forum.sienci.com/u/lonsdorf83)\ **Post date:** [September 6, 2026, 6:24pm UTC](https://forum.sienci.com/t/altmill-is-there-anyone-in-the-wisconsin-area-that-has-a-altmill-and-can-help-me-set-up-a-couple-of-things-on-gsender-touch-plate-and-homing-my-machine/27027/4 "2026-09-06T18:24:56Z")
Would you be willing to come over and help me figure it out? I think I have the touch plate figured out, but homing and the tool length sensor not so much ---
**Author:** ![Groucho194](https://forum.sienci.com/letter_avatar_proxy/v4/letter/g/ba9def/32.png) [@Groucho194](https://forum.sienci.com/u/Groucho194)\ **Post date:** [September 10, 2026, 12:24am UTC](https://forum.sienci.com/t/altmill-is-there-anyone-in-the-wisconsin-area-that-has-a-altmill-and-can-help-me-set-up-a-couple-of-things-on-gsender-touch-plate-and-homing-my-machine/27027/7 "2026-09-10T00:24:41Z")
Where are you? When? What are you trying to do? Setup? ---
**Author:** ![Groucho194](https://forum.sienci.com/letter_avatar_proxy/v4/letter/g/ba9def/32.png) [@Groucho194](https://forum.sienci.com/u/Groucho194)\ **Post date:** [September 10, 2026, 12:27am UTC](https://forum.sienci.com/t/altmill-is-there-anyone-in-the-wisconsin-area-that-has-a-altmill-and-can-help-me-set-up-a-couple-of-things-on-gsender-touch-plate-and-homing-my-machine/27027/8 "2026-09-10T00:27:16Z")
That is a 4 hr ride. Send me an email: [golden.1.mm.2@gmail.com](mailto:golden.1.mm.2@gmail.com)