# Altmill Leg bracket CAD help

**URL:** <https://forum.sienci.com/t/altmill-leg-bracket-cad-help/26664>\
**Category:** 📛 Others\
**Created:** [July 2, 2026, 4:02pm UTC](https://forum.sienci.com/t/altmill-leg-bracket-cad-help/26664 "2026-07-02T16:02:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cncConfusion](https://forum.sienci.com/user_avatar/forum.sienci.com/cncconfusion/32/12731_2.png) [@cncConfusion](https://forum.sienci.com/u/cncConfusion)\
**Post date:** [July 2, 2026, 4:02pm UTC](https://forum.sienci.com/t/altmill-leg-bracket-cad-help/26664/1 "2026-07-02T16:02:51Z")

</div>

Hello all,

I am trying to make a bracket to go on the Altmill legs. I have tried modeling it up in Fusion and have gotten very close to what I want but can’t quit get it across the line.

I have went on Onshape and tried to flatten out the leg into a sheet metal piece but I cannot get that to work either.

Can someone with more knowledge in CAD help me figure this out?

Can someone provide me with a flat sheet metal layout of the leg?

I can share my Fusion file if that will help someone.

---

<div class="post-metadata">

**Author:** ![gremlin](https://forum.sienci.com/user_avatar/forum.sienci.com/gremlin/32/13047_2.png) [@gremlin](https://forum.sienci.com/u/gremlin)\
**Post date:** [July 2, 2026, 9:46pm UTC](https://forum.sienci.com/t/altmill-leg-bracket-cad-help/26664/2 "2026-07-02T21:46:38Z")

</div>

I found the onshape model when I did get it to a DXF format for the AltMill Mk2 was incorrect on the profile, so I ended up modeling by own for the Ultimate AltMill drawer front build. I posted an easel file with the front in it, but I sense you’re looking for something different.

---

<div class="post-metadata">

**Author:** ![cncConfusion](https://forum.sienci.com/user_avatar/forum.sienci.com/cncconfusion/32/12731_2.png) [@cncConfusion](https://forum.sienci.com/u/cncConfusion)\
**Post date:** [July 2, 2026, 11:22pm UTC](https://forum.sienci.com/t/altmill-leg-bracket-cad-help/26664/3 "2026-07-02T23:22:44Z")

</div>

@gremlin I will check out your post and see what I can use from it.

I may have to just create it from scratch. I was hoping using the model would make it easier, but alas it seems not. 🤪🤪