# Attempting to use surfacing from gsender

**URL:** <https://forum.sienci.com/t/attempting-to-use-surfacing-from-gsender/24602>\
**Category:** ❓ Question\
**Created:** [October 13, 2025, 11:17am UTC](https://forum.sienci.com/t/attempting-to-use-surfacing-from-gsender/24602 "2025-10-13T11:17:19Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [October 13, 2025, 1:13pm UTC](https://forum.sienci.com/t/attempting-to-use-surfacing-from-gsender/24602/2 "2025-10-13T13:13:13Z")

</div>

@courtney There is a known bug in the surfacing tool in 1.5.5. You can read about it here

> [@Surfacing Tool wouldn't accept alteration of project dimensions](https://forum.sienci.com/t/surfacing-tool-wouldnt-accept-alteration-of-project-dimensions/22095):
>
> Recently updated to 1.5.5 and when trying to surface a board alteration of dimensions refused to change after multiple attempts. Appeared to import dimensions from previous version but could never have the changes accepted. Back to 1.5.4 and all worked fine.

You have posted this in the UGS category. I’ve moved it to the gSender category.

---

_[View the full topic](https://forum.sienci.com/t/attempting-to-use-surfacing-from-gsender/24602)._