# Basic G-Code for Basic Macros?

**URL:** <https://forum.sienci.com/t/basic-g-code-for-basic-macros/10381>\
**Category:** ❓ Question\
**Created:** [November 23, 2023, 5:05am UTC](https://forum.sienci.com/t/basic-g-code-for-basic-macros/10381 "2023-11-23T05:05:56Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![NCNC](https://forum.sienci.com/user_avatar/forum.sienci.com/ncnc/32/6040_2.png) [@NCNC](https://forum.sienci.com/u/NCNC)\
**Post date:** [November 23, 2023, 5:05am UTC](https://forum.sienci.com/t/basic-g-code-for-basic-macros/10381/1 "2023-11-23T05:05:56Z")

</div>

Hello,  
Where can I find basic g-code to create macros for gSender?  
From what I read in other forum posts, and from what little I know about g-code, it’s not standard for all (hence why the need for post-processors), so which g-code “variant” should I search for? any specific website you recommend that’s compatible with gSender?

Thanks!

---

<div class="post-metadata">

**Author:** ![\_Michael](https://forum.sienci.com/user_avatar/forum.sienci.com/_michael/32/2962_2.png) [@\_Michael](https://forum.sienci.com/u/_Michael)\
**Post date:** [November 23, 2023, 5:15am UTC](https://forum.sienci.com/t/basic-g-code-for-basic-macros/10381/2 "2023-11-23T05:15:34Z")

</div>

gSender is for GRBL machines so macros should be able to use any GRBL G-Code and I think the macros support some non G-Code stuff as well.

I found [this for GRBL supported G-Codes](https://cncphilosophy.com/grbl-g-code-commands-list/) that seemed to be a good article.

Also check out the [resource page for gSender](https://resources.sienci.com/view/gs-additional-features/#macros) in the macros section. At the end of that section of the gSender docs they mention the library that they use for macros and you’ll probably need to read up on that to know the full extent of what macros can do.

That should get you started. I haven’t really done anything with macros myself but I think I have found the resources needed to learn them.

---

<div class="post-metadata">

**Author:** ![NCNC](https://forum.sienci.com/user_avatar/forum.sienci.com/ncnc/32/6040_2.png) [@NCNC](https://forum.sienci.com/u/NCNC)\
**Post date:** [November 23, 2023, 7:41am UTC](https://forum.sienci.com/t/basic-g-code-for-basic-macros/10381/3 "2023-11-23T07:41:20Z")

</div>

Thank you \_Michael! much appreciated 🙂

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [November 5, 2024, 3:48am UTC](https://forum.sienci.com/t/basic-g-code-for-basic-macros/10381/4 "2024-11-05T03:48:36Z")

</div>

Closed on November 5, 2024, 3:48am UTC