# Building AutoDustBoot for AltMill

**URL:** <https://forum.sienci.com/t/building-autodustboot-for-altmill/15006>\
**Category:** 🧰 CNC Setup\
**Created:** [December 5, 2024, 3:07am UTC](https://forum.sienci.com/t/building-autodustboot-for-altmill/15006 "2024-12-05T03:07:14Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![rblondeau](https://forum.sienci.com/letter_avatar_proxy/v4/letter/r/9d8465/32.png) [@rblondeau](https://forum.sienci.com/u/rblondeau)\
**Post date:** [January 13, 2025, 4:46am UTC](https://forum.sienci.com/t/building-autodustboot-for-altmill/15006/21 "2025-01-13T04:46:24Z")

</div>

Any chance this will work on the Longmill MK2? I’d definitely be interested if it did 🙂

---

<div class="post-metadata">

**Author:** ![Nbase1](https://forum.sienci.com/user_avatar/forum.sienci.com/nbase1/32/8515_2.png) [@Nbase1](https://forum.sienci.com/u/Nbase1)\
**Post date:** [January 19, 2025, 10:14pm UTC](https://forum.sienci.com/t/building-autodustboot-for-altmill/15006/22 "2025-01-19T22:14:30Z")

</div>

Awesome, I would be interested. Kepp us posted. Nice job

---

<div class="post-metadata">

**Author:** ![Abc](https://forum.sienci.com/user_avatar/forum.sienci.com/abc/32/12808_2.png) [@Abc](https://forum.sienci.com/u/Abc)\
**Post date:** [August 22, 2026, 11:26pm UTC](https://forum.sienci.com/t/building-autodustboot-for-altmill/15006/23 "2026-08-22T23:26:17Z")

</div>

What’s the status on the AutoDustBoot? And what is your site?

---

<div class="post-metadata">

**Author:** ![siganberg](https://forum.sienci.com/letter_avatar_proxy/v4/letter/s/94ad74/32.png) [@siganberg](https://forum.sienci.com/u/siganberg)\
**Post date:** [August 22, 2026, 11:38pm UTC](https://forum.sienci.com/t/building-autodustboot-for-altmill/15006/24 "2026-08-22T23:38:07Z")

</div>

> **[AutoDustBoot with v2 Controller Board - Alt Mill (Pre-Order)](https://www.franciscreation.com/autodustboot-with-v2-controller-board-alt-mill)**
>
> Estimated shipping
>     
>     
>     
> September 2026
>     
>   
> 
>   
> V2 brings a new control board, tighter reliability, and a set of refinements
> that came directly out of V1 feedback. The date above is an estimate
> @ this page updates if it...

[Previous page](https://forum.sienci.com/t/building-autodustboot-for-altmill/15006.md?page=1)