# Can I use MILLMAGE as my sender

**URL:** <https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988>\
**Category:** 📄 General\
**Created:** [March 22, 2026, 3:28am UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988 "2026-03-22T03:28:37Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![PD1955](https://forum.sienci.com/letter_avatar_proxy/v4/letter/p/5f9b8f/32.png) [@PD1955](https://forum.sienci.com/u/PD1955)\
**Post date:** [March 22, 2026, 3:28am UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988/1 "2026-03-22T03:28:37Z")

</div>

ok well , I acknowledge g sender is great ,yet the z when moving down to zero ,or get close Often sticks and drills and breaks a bit , very annoying

question as il have MILLMAGE and they have an in house sender ! can u use that instead

---

<div class="post-metadata">

**Author:** ![Chucky\_ott](https://forum.sienci.com/user_avatar/forum.sienci.com/chucky_ott/32/8692_2.png) [@Chucky\_ott](https://forum.sienci.com/u/Chucky_ott)\
**Post date:** [March 22, 2026, 9:43am UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988/2 "2026-03-22T09:43:33Z")

</div>

@PD1955 Millmage says maybe…if you have one of these CNCs.

> **[MillMage Compatibility Checker](https://matrix.millmage.com/)**

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [March 22, 2026, 12:55pm UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988/3 "2026-03-22T12:55:53Z")

</div>

@PD1955 Welcome to the group, Patrick.

I have moved your question to a more appropriate category.

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [March 30, 2026, 11:51pm UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988/4 "2026-03-30T23:51:00Z")

</div>

@PD1955 Patrick: Did you get sorted out using MillMage?

---

<div class="post-metadata">

**Author:** ![PD1955](https://forum.sienci.com/letter_avatar_proxy/v4/letter/p/5f9b8f/32.png) [@PD1955](https://forum.sienci.com/u/PD1955)\
**Post date:** [March 31, 2026, 7:59am UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988/5 "2026-03-31T07:59:54Z")

</div>

I think so , think its saying I can?

---

<div class="post-metadata">

**Author:** ![Chucky\_ott](https://forum.sienci.com/user_avatar/forum.sienci.com/chucky_ott/32/8692_2.png) [@Chucky\_ott](https://forum.sienci.com/u/Chucky_ott)\
**Post date:** [March 31, 2026, 8:09am UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988/6 "2026-03-31T08:09:41Z")

</div>

@PD1955 you don’t say which CNC you have, so impossible for us to tell.

---

<div class="post-metadata">

**Author:** ![PD1955](https://forum.sienci.com/letter_avatar_proxy/v4/letter/p/5f9b8f/32.png) [@PD1955](https://forum.sienci.com/u/PD1955)\
**Post date:** [March 31, 2026, 9:20am UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988/7 "2026-03-31T09:20:35Z")

</div>

all good thank you for your response , just what I was after\>\>\>\> really all good

thank you

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [March 31, 2026, 10:50am UTC](https://forum.sienci.com/t/can-i-use-millmage-as-my-sender/25988/8 "2026-03-31T10:50:39Z")

</div>

Closed on March 31, 2026, 10:50am UTC