# Carveco and gsender

**URL:** <https://forum.sienci.com/t/carveco-and-gsender/5237>\
**Category:** CarveCo\
**Created:** [February 21, 2022, 6:10pm UTC](https://forum.sienci.com/t/carveco-and-gsender/5237 "2022-02-21T18:10:16Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chuckxemt](https://forum.sienci.com/user_avatar/forum.sienci.com/chuckxemt/32/3024_2.png) [@Chuckxemt](https://forum.sienci.com/u/Chuckxemt)\
**Post date:** [February 21, 2022, 6:10pm UTC](https://forum.sienci.com/t/carveco-and-gsender/5237/1 "2022-02-21T18:10:16Z")

</div>

Does anyone know what gcode to use when saving code in CarveCo to be used in gsender? I have a Longmill 30x30. Thank you  
Chuck

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [February 21, 2022, 6:53pm UTC](https://forum.sienci.com/t/carveco-and-gsender/5237/2 "2022-02-21T18:53:16Z")

</div>

@Chuckxemt Welcome to the group, Chuck. You’ll find lots of help here. Be sure to post your projects for us all to see.

I don’t use Carveco, but I know that it is very similar to VCarve. Use either grbl inch or grbl mm, depending on what system you design your projects in.

If Carveco does not offer those post processors, report back and I’m sure someone will be more help than I have been. 😀

---

<div class="post-metadata">

**Author:** ![Jake](https://forum.sienci.com/user_avatar/forum.sienci.com/jake/32/2491_2.png) [@Jake](https://forum.sienci.com/u/Jake)\
**Post date:** [February 21, 2022, 11:04pm UTC](https://forum.sienci.com/t/carveco-and-gsender/5237/3 "2022-02-21T23:04:04Z")

</div>

Hello sir! Welcome to the forum! I don’t have my CNC yet but concur what the moderator says. Be active here! We enjoy seeing peoples creativity and it helps everyone.

---

<div class="post-metadata">

**Author:** ![RickW](https://forum.sienci.com/letter_avatar_proxy/v4/letter/r/aca169/32.png) [@RickW](https://forum.sienci.com/u/RickW)\
**Post date:** [February 22, 2022, 7:12pm UTC](https://forum.sienci.com/t/carveco-and-gsender/5237/4 "2022-02-22T19:12:05Z")

</div>

Hey Chuck,  
Welcome!  
I don’t use Curveco either, cost/return issues  
The software part is the hardest part , play with it and have fun. If this wasn’t fun, nobody would do it. Imperial or metric works with gsender, no need to get too fancy. Load it and run it and stay close to the pause button

---

<div class="post-metadata">

**Author:** ![jason.shoes](https://forum.sienci.com/user_avatar/forum.sienci.com/jason.shoes/32/2602_2.png) [@jason.shoes](https://forum.sienci.com/u/jason.shoes)\
**Post date:** [February 22, 2022, 10:46pm UTC](https://forum.sienci.com/t/carveco-and-gsender/5237/5 "2022-02-22T22:46:27Z")

</div>

Welcome Chuck, I use Grbl (mm) .gcode out of Carveco (with gSender).

---

<div class="post-metadata">

**Author:** ![0so](https://forum.sienci.com/letter_avatar_proxy/v4/letter/0/a4c791/32.png) [@0so](https://forum.sienci.com/u/0so)\
**Post date:** [March 10, 2022, 11:27pm UTC](https://forum.sienci.com/t/carveco-and-gsender/5237/6 "2022-03-10T23:27:29Z")

</div>

Hi Chuck I use Grbl inch.

0so