# Clarification on MK2 Cutting Area

**URL:** <https://forum.sienci.com/t/clarification-on-mk2-cutting-area/5865>\
**Category:** 🧠 New Wisdom\
**Created:** [May 15, 2022, 7:17pm UTC](https://forum.sienci.com/t/clarification-on-mk2-cutting-area/5865 "2022-05-15T19:17:31Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![thisoldlight](https://forum.sienci.com/user_avatar/forum.sienci.com/thisoldlight/32/2859_2.png) [@thisoldlight](https://forum.sienci.com/u/thisoldlight)\
**Post date:** [May 15, 2022, 7:17pm UTC](https://forum.sienci.com/t/clarification-on-mk2-cutting-area/5865/1 "2022-05-15T19:17:31Z")

</div>

While laying out my spoilboard location, I came across conflicting information on the exact cutting area for the 30x30 MK2 for X, Y and Z. There are dimensions listed on the [sienci.com](http://sienci.com) website, under the MK2 section where there is a PDF file you can link to for drawings. Then, in [https://resources.sienci.com](https://resources.sienci.com) there is a different set of measurements listed for the cutting area. I reached out to Jason at Sienci, and he verified the measurements on the resource site are the correct ones. Admittedly, the differences are minor, but I wanted to pass this on. Please see attached PDF where I have updated a Sienci drawing with the correct numbers (in millimeters) and also added inch measurements.  
[MK2 cutting area.pdf](https://forum.sienci.com/uploads/short-url/lG97gp5E16cRlzdeUBySQLP17hB.pdf) (96.2 KB)