# CNC machine fails to run (Zero feed)

**URL:** <https://forum.sienci.com/t/cnc-machine-fails-to-run-zero-feed/11392>\
**Category:** ❓ Question\
**Created:** [February 26, 2024, 6:53pm UTC](https://forum.sienci.com/t/cnc-machine-fails-to-run-zero-feed/11392 "2024-02-26T18:53:46Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![iuliancalin](https://forum.sienci.com/user_avatar/forum.sienci.com/iuliancalin/32/6213_2.png) [@iuliancalin](https://forum.sienci.com/u/iuliancalin)\
**Post date:** [March 3, 2024, 7:17pm UTC](https://forum.sienci.com/t/cnc-machine-fails-to-run-zero-feed/11392/19 "2024-03-03T19:17:16Z")

</div>

alright, so i finally figured what could be the issue.  
i installed gsender at home and plugged the same but damaged board, the chip is fine, it’s just a connector that i burned for limit switches. the board works fine other than that  
so, apparently i can’t apply the settings on $11=0.010 and $12=0.010 i can only apply on both 0.01, might be a bug?  
i can apply the above settings on older versions up to 1.4.1  
it does not work on 1.4.2 1.4.3 and 1.4.4RC1  
i can try tomorrow with the version 1.4.1 and come back with the result  
it would be really nice if i could make it work on 1.4.2 at least since i have a 3d probe that i use to find stock corners

---

_[View the full topic](https://forum.sienci.com/t/cnc-machine-fails-to-run-zero-feed/11392)._