# Controlling T1 autospin from Fusion 360

**URL:** <https://forum.sienci.com/t/controlling-t1-autospin-from-fusion-360/26762>\
**Category:** Fusion 360\
**Created:** [July 22, 2026, 5:06pm UTC](https://forum.sienci.com/t/controlling-t1-autospin-from-fusion-360/26762 "2026-07-22T17:06:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![bevanfrost](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/82dd89/32.png) [@bevanfrost](https://forum.sienci.com/u/bevanfrost)\
**Post date:** [July 22, 2026, 5:06pm UTC](https://forum.sienci.com/t/controlling-t1-autospin-from-fusion-360/26762/1 "2026-07-22T17:06:31Z")

</div>

Hi. Trying to get everything working - Fusion 360 to a Scienci labs T1 autospin router on a onefinity woodworker x50. The Onefinity test file worked well, it seemed to have the spindle commands, however, when I created G code in fusion 360 with the Kirbre enterprises post processor, it didn’t seem to have the spindle commands as the router did not turn on. Is there a different post processor or is there a setting I can modify in fusion so that when I generate G code it has the spindle commands automatically? Or am I missing some greater context here? Thanks