# Delay Spindle after Tool Change

**URL:** <https://forum.sienci.com/t/delay-spindle-after-tool-change/11099>\
**Category:** 🐛 Bug\
**Created:** [February 3, 2024, 2:07am UTC](https://forum.sienci.com/t/delay-spindle-after-tool-change/11099 "2024-02-03T02:07:30Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![LordofCandy](https://forum.sienci.com/user_avatar/forum.sienci.com/lordofcandy/32/6218_2.png) [@LordofCandy](https://forum.sienci.com/u/LordofCandy)\
**Post date:** [February 3, 2024, 2:07am UTC](https://forum.sienci.com/t/delay-spindle-after-tool-change/11099/1 "2024-02-03T02:07:30Z")

</div>

How is this supposed to work, because I don’t see it working so far or it’s got such a small delay it’s not activating. Seems to go back to 0, drop in, and drag 4" before I hear the spindle kick on.

running: 1.4.1

I’m adding dwells to my post processor to see if that can help but I’d still like to understand what’s going on if possible. 😃

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [August 13, 2025, 1:24pm UTC](https://forum.sienci.com/t/delay-spindle-after-tool-change/11099/2 "2025-08-13T13:24:48Z")

</div>

I think what’s happening here is that we might be missing adding in the dwells from the settings in the first place so we’ll look into this 👍

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [September 24, 2025, 11:40pm UTC](https://forum.sienci.com/t/delay-spindle-after-tool-change/11099/3 "2025-09-24T23:40:57Z")

</div>

@LordofCandy, as of 1.5.5 the delay that you add into Config should now apply in other situations like when tool changing or using start from line. This delay is specific to grbl devices, since for grblHAL devices it’s supported as an official firmware setting which can ensure the delay happens at all times which is much more ideal. Let us know if the update is working out for you!

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [January 5, 2026, 7:02pm UTC](https://forum.sienci.com/t/delay-spindle-after-tool-change/11099/4 "2026-01-05T19:02:55Z")

</div>

Closed on January 5, 2026, 7:02pm UTC


