# Estop Action Button Toggle for LEDs **URL:** https://forum.sienci.com/t/estop-action-button-toggle-for-leds/15590 **Category:** ❓Question **Created:** [January 19, 2025, 2:16pm UTC](https://forum.sienci.com/t/estop-action-button-toggle-for-leds/15590 "2025-01-19T14:16:37Z") **Posts on this page:** 1 **Showing post:** 8
### Author: ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff) #### Post date: [January 21, 2025, 10:30pm UTC](https://forum.sienci.com/t/estop-action-button-toggle-for-leds/15590/8 "2025-01-21T22:30:33Z")
@jkunda funny enough, @KGN actually already made a macro to do something similar to what you’re looking for. You should be able to enter it as a gSender macro no problem: [Macro lighting control - #7 by KGN](https://forum.sienci.com/t/macro-lighting-control/11958/7) As far as making it a working macro using one of the Action buttons themselves, this should also be possible but would first require either a new firmware version that we’re still working on that supports more commands and logic, or an update to the LED state management as Kevin mentions later on in the thread I linked - though perhaps there could also be a third solution available no one has yet to think of 🤔 --- _[View the full topic](https://forum.sienci.com/t/estop-action-button-toggle-for-leds/15590)._