# First "test" project

**URL:** <https://forum.sienci.com/t/first-test-project/26667>\
**Category:** 💥 Amazing fail\
**Created:** [July 3, 2026, 12:02am UTC](https://forum.sienci.com/t/first-test-project/26667 "2026-07-03T00:02:26Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Chucky\_ott](https://forum.sienci.com/user_avatar/forum.sienci.com/chucky_ott/32/8692_2.png) [@Chucky\_ott](https://forum.sienci.com/u/Chucky_ott)\
**Post date:** [July 3, 2026, 8:01am UTC](https://forum.sienci.com/t/first-test-project/26667/5 "2026-07-03T08:01:31Z")

</div>

@DavidB Test results are here: [Feeds and speeds - the topic that just won't die - #12 by Chucky\_ott](https://forum.sienci.com/t/feeds-and-speeds-the-topic-that-just-wont-die/26561/12)

The 45° finish pass have the worst results.

FWIW, you’ll definitely get better results when you switch to a TBN. A flat end mill for a finish pass on a 3D carve will not give a great finish.

---

_[View the full topic](https://forum.sienci.com/t/first-test-project/26667)._