# Fusion 360 tool path cutting above the stock

**URL:** <https://forum.sienci.com/t/fusion-360-tool-path-cutting-above-the-stock/11001>\
**Category:** Fusion 360\
**Created:** [January 24, 2024, 5:36am UTC](https://forum.sienci.com/t/fusion-360-tool-path-cutting-above-the-stock/11001 "2024-01-24T05:36:41Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![silo105](https://forum.sienci.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@silo105](https://forum.sienci.com/u/silo105)\
**Post date:** [January 25, 2024, 10:26pm UTC](https://forum.sienci.com/t/fusion-360-tool-path-cutting-above-the-stock/11001/22 "2024-01-25T22:26:10Z")

</div>

The suggestions you guys @NeilFerreri, @elbarsal gave me worked! I am not cutting air anymore. Many thanks! Jeff

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [January 26, 2024, 12:05am UTC](https://forum.sienci.com/t/fusion-360-tool-path-cutting-above-the-stock/11001/23 "2024-01-26T00:05:22Z")

</div>

@silo105 It’s good to see that the guys were able to resolve your problem, Jeff.

I’m closing this thread as resolved. Don’t hesitate to pose new questions as they arise. As you have seen, the depth of knowledge here and the willingness to help is very deep.

Please consider posting your projects in the Show Off category.

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [January 26, 2024, 12:05am UTC](https://forum.sienci.com/t/fusion-360-tool-path-cutting-above-the-stock/11001/24 "2024-01-26T00:05:26Z")

</div>



[Previous page](https://forum.sienci.com/t/fusion-360-tool-path-cutting-above-the-stock/11001.md?page=1)