# g-Sender 6.5 Beta Windows -unable to disable homeing **URL:** \ **Category:** šŸ› Bug\ **Created:** [June 9, 2021, 11:26am UTC](https://forum.sienci.com/t/g-sender-6-5-beta-windows-unable-to-disable-homeing/3078 "2021-06-09T11:26:09Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Menglor](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/4bbf92/32.png) [@Menglor](https://forum.sienci.com/u/Menglor)\ **Post date:** [June 9, 2021, 11:26am UTC](https://forum.sienci.com/t/g-sender-6-5-beta-windows-unable-to-disable-homeing/3078/1 "2021-06-09T11:26:09Z")
I am trying to play with homing on my longmill I am running into all kinds of issues, I will be verifying things and reporting them. However, I feel this issue is an easy one to report. When enabling Homing, in the firmware everything seems to work however if you try to disable homing, and save. after reconnecting, the variable is restored. using the console, seems to work just fine. steps to reproduce : Click on Firmware. change the following values $5 $22=1 $22=3 $27=5 $130=812 $131=812 $132=105 click on Apply new settings wait for ā€œcompletedā€ message type $$ in console and verify settings have changed. exit gSender Open gSender do not clear the error code (not sure if this is required, but this is how I did it) open Firmware menu Change $22 to 0 click on Apply new settings wait for ā€œcompletedā€ message exit gSender Open gSender At this point, there should be NO ERROR POPUP as homing is disable. however look at the firmware page and you can see $22 is set back to 1 in the console type $22=1 type $x exit gSender Open gSender note that there is no longer a error indicating homing is required. note: I am also investigating a problem, where after homing in gSender, the error pops up and wants to continuously home, however, I havent confirmed this, it was late. as well, this seems to work just fine in UGS fyi: I am using this thread to setup homing > [@My homing switch set up](https://forum.sienci.com/t/my-homing-switch-set-up/2949): > > I wanted to share how I set up a homing cycle using limit switches for others thinking of doing this. I want to say this is how I set up my machine and yours my vary slightly but I will include the stl files for the limit switch holder and the mounting blocks that I derived from the longmill part files so you can customize the switch distances based on your set up. Please be prepared to make necessary changes based on your machine and set up. I will not have time to walk people thru the proceā€¦ noteable diviations 1 - I am using headphone audio cable instead of the 22 gauge used in this thread. 2 - Author is using a .47uf capacitors instead of the recomended .1uf from this thread [Inductive Sensors - LongMill CNC](https://resources.sienci.com/view/lm-adding-limit-switches/) ---
**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\ **Post date:** [June 11, 2021, 5:40pm UTC](https://forum.sienci.com/t/g-sender-6-5-beta-windows-unable-to-disable-homeing/3078/2 "2021-06-11T17:40:12Z")
@Menglor I think this is coming from the fact that firmware changes arenā€™t normally registered when the machine is in a locked state. Perhaps we could make some changes to the behavior of the firmware window to not allow access while locked so that there isnā€™t confusion about this ---
**Author:** ![Menglor](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/4bbf92/32.png) [@Menglor](https://forum.sienci.com/u/Menglor)\ **Post date:** [June 11, 2021, 9:24pm UTC](https://forum.sienci.com/t/g-sender-6-5-beta-windows-unable-to-disable-homeing/3078/3 "2021-06-11T21:24:43Z")
Functionality that the firmware button offers is annoying because it doesnā€™t work but you can use the $22=0 and it works Iā€™m just reporting the issue ---
**Author:** ![Menglor](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/4bbf92/32.png) [@Menglor](https://forum.sienci.com/u/Menglor)\ **Post date:** [June 13, 2021, 9:41pm UTC](https://forum.sienci.com/t/g-sender-6-5-beta-windows-unable-to-disable-homeing/3078/4 "2021-06-13T21:41:42Z")
@chrismakesstuff Tested in 0.6.6 seems to be working fine. ---
**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\ **Post date:** [September 14, 2021, 4:23pm UTC](https://forum.sienci.com/t/g-sender-6-5-beta-windows-unable-to-disable-homeing/3078/5 "2021-09-14T16:23:29Z")