# GCode Question and Help

**URL:** <https://forum.sienci.com/t/gcode-question-and-help/16937>\
**Category:** Carbide Create\
**Created:** [April 17, 2025, 9:23pm UTC](https://forum.sienci.com/t/gcode-question-and-help/16937 "2025-04-17T21:23:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![latenightdesigns](https://forum.sienci.com/letter_avatar_proxy/v4/letter/l/3da27b/32.png) [@latenightdesigns](https://forum.sienci.com/u/latenightdesigns)\
**Post date:** [April 17, 2025, 9:23pm UTC](https://forum.sienci.com/t/gcode-question-and-help/16937/1 "2025-04-17T21:23:33Z")

</div>

Hey all, I am using this GCODE I made on Carbide Create, i’ve used this many times but today i upload it to gSender, two differnt gcodes, once for every tool. When I go to start the second one it doesn’t start in the correct location. It skips where the other one did work and starts over whats already been done.

I have the files for someone to look and run I just can’t upload them to here.

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [April 17, 2025, 10:44pm UTC](https://forum.sienci.com/t/gcode-question-and-help/16937/2 "2025-04-17T22:44:52Z")

</div>

@latenightdesigns I’ve moved your post to the Carbide Create category.