# gSender 0.7.4 Problem

**URL:** <https://forum.sienci.com/t/gsender-0-7-4-problem/3852>\
**Category:** 🐛 Bug\
**Created:** [October 9, 2021, 4:49pm UTC](https://forum.sienci.com/t/gsender-0-7-4-problem/3852 "2021-10-09T16:49:09Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [October 15, 2021, 3:12pm UTC](https://forum.sienci.com/t/gsender-0-7-4-problem/3852/13 "2021-10-15T15:12:17Z")

</div>

If it’s code you run every time on program start, you could add it to “Program start” section in Start/Stop G-code in preferences. This will run whatever gcode is entered before program start for every single program. If you always need a G55 manually inputted into a program, it would probably be significantly faster for you to just enter the command there, along with whatever else you consistently need to do on program start.

---

_[View the full topic](https://forum.sienci.com/t/gsender-0-7-4-problem/3852)._