# gSender 1.0.4 Release **URL:** \ **Category:** đź“Ś Release Thread\ **Created:** [February 15, 2022, 9:09pm UTC](https://forum.sienci.com/t/gsender-1-0-4-release/5188 "2022-02-15T21:09:50Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\ **Post date:** [February 15, 2022, 9:09pm UTC](https://forum.sienci.com/t/gsender-1-0-4-release/5188/1 "2022-02-15T21:09:50Z")
Hey folks, Busy times at Sienci - we have a few exciting projects on the go on the software side of things. We’ve put some time over the last week in fixing some recurring issues/feedback in gSender and have a new build available for you. We also have added support for a few upcoming new offerings from the company itself, such as the MK2 with new machine profiles and firmware images, and a soon-to-be released novel probe touchplate. We’re also slowly adding more and more laser-specific features to improve the workflow of anyone with the new laser module. As always, we all appreciate the continued feedback and growing community here! **Major Changes** - Add support for distinct Spindle min/max and laser min/max while in laser or spindle mode - “Pause” toolchange workflow renamed to “Manual”, and now allows jogging and macros to be run - Default feedrate in “start from line” now reflects file unit modal - Fixed issue where units weren’t always consistent on Go-To buttons leading to Z plunge - Tool diameter selection hidden on Z probe to prevent user confusion. - Lowered minimum resolution from 1280X960 to 1024X768 and added responsiveness to account for that. - Trimmed machine profile list to generic set and made it more obvious that machine dimensions are as reported from EEPROM. - Added MK2 machine profiles and support for default settings for new machines. - Updated firmware images for MK1 and MK2 - Fixed regression where comments weren’t properly stripped before sending to GBRL - Corrections to Auto-diameter probe profiles - Fixed issue where T commands could cause errors when on a line with M6 commands - Stop job should now consistently reset board (0x18) as intended - Fixed various tooltip errors - Fixed issue where calibration tools weren’t using correct jog controls > **[Introducing gSender | Sienci Labs](https://sienci.com/gsender/)** > > Your CNC dashboard It's Free! Supports grbl and grblHAL CNCs Connect over USB or Ethernet Wireless control from a second device through a browser Quickly position your CNC in all axes Set zero manually or using a touch plate to locate your cutting... > **[Releases · Sienci-Labs/gsender](https://github.com/Sienci-Labs/gsender/releases/)** > > Connect to and control grbl and grblHAL-based CNCs with ease - Sienci-Labs/gsender ---
**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\ **Post date:** [February 15, 2022, 9:10pm UTC](https://forum.sienci.com/t/gsender-1-0-4-release/5188/2 "2022-02-15T21:10:05Z")
---
**Author:** ![viewer.sons](https://forum.sienci.com/letter_avatar_proxy/v4/letter/v/4491bb/32.png) [@viewer.sons](https://forum.sienci.com/u/viewer.sons)\ **Post date:** [February 18, 2022, 5:01pm UTC](https://forum.sienci.com/t/gsender-1-0-4-release/5188/3 "2022-02-18T17:01:56Z")
still having pause bug after tool change code executes. program will resume, run for a second or two then pause. happens after every tool change. im able to resume with no problems. its just an annoyance. besides that the program is looking great and i think im ready to retire bCNC for GSENDER full time. ---
**Author:** ![CrookedWoodTex](https://forum.sienci.com/user_avatar/forum.sienci.com/crookedwoodtex/32/10446_2.png) [@CrookedWoodTex](https://forum.sienci.com/u/CrookedWoodTex)\ **Post date:** [February 18, 2022, 5:06pm UTC](https://forum.sienci.com/t/gsender-1-0-4-release/5188/4 "2022-02-18T17:06:02Z")
This current discussion has made me skip 1.0.4 . I’ll wait for the fixes. ---
**Author:** ![viewer.sons](https://forum.sienci.com/letter_avatar_proxy/v4/letter/v/4491bb/32.png) [@viewer.sons](https://forum.sienci.com/u/viewer.sons)\ **Post date:** [March 2, 2022, 3:31pm UTC](https://forum.sienci.com/t/gsender-1-0-4-release/5188/5 "2022-03-02T15:31:55Z")
regarding the pause “bug”: after doing some testing this morning I’ve found a work around. If i remove the final M0 from my post code i dont get the custom message but the machine will return to the tool change position and wait for a resume. This is working fine for me. So i’ve modified my post code to below: (this is a modified version from Neil F) ```auto G53 X0 Y-10 G53 Z-58 G91 G38.2 z-45 F100 G0 z2 G38.2 z-5 F40 ;"dial-it-in" probes G4 P.25 G38.4 z10 F20 G4 P.25 G38.2 z-2 F10 G4 P.25 G38.4 z10 F5 G4 P.25 G90 %wait ; Update Z offset for new tool G10 L20 Z[global.state.TOOL_REFERENCE] %wait G91 G0 Z5 G90 G53 Z-10 G53 X171.5 Y-200 %wait ; Restore modal state [WCS] [PLANE] [UNITS] [DISTANCE] [FEEDRATE] [SPINDLE] [COOLANT] ``` ---
**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\ **Post date:** [March 4, 2022, 9:02pm UTC](https://forum.sienci.com/t/gsender-1-0-4-release/5188/6 "2022-03-04T21:02:59Z")
---
**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\ **Post date:** [March 4, 2022, 9:03pm UTC](https://forum.sienci.com/t/gsender-1-0-4-release/5188/7 "2022-03-04T21:03:04Z")