# gSender/AltMill 9-Key Pendant Keyboard **URL:** \ **Category:** 🪑 Projects\ **Created:** [March 14, 2025, 4:40pm UTC](https://forum.sienci.com/t/gsender-altmill-9-key-pendant-keyboard/16497 "2025-03-14T16:40:29Z")\ **Posts on this page:** 1\ **Showing post:** 14
**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\ **Post date:** [March 16, 2025, 12:42pm UTC](https://forum.sienci.com/t/gsender-altmill-9-key-pendant-keyboard/16497/14 "2025-03-16T12:42:36Z")
You may want to look at these threads for ideas on how to control your machines. > [@Mini Numeric Keypad](https://forum.sienci.com/t/mini-numeric-keypad/3112): > > Hi gang! In case anyone is interested in using the keybinding setup of gSender I ran across this neat numeric keypad on Amazon. I tried the Jelly Comb wireless USB but it didn’t have enough keys to cover all of the functions I wanted to use. This keypad has 35 keys but 3 of them are for special computer funcitons like search, calculator and screen print so they can’t be used. There is also a 00 key that performs like the 0 key so consider it a duplicate. That leaves 31 keys which is more than en… > [@Controlling gSender with a tablet](https://forum.sienci.com/t/controlling-gsender-with-a-tablet/7869): > > New to me controller for gSender. For quite a while, I had been using a wireless numeric keypad to send the keyboard shortcuts to the Long Mill controller for the gSender functions and for macros that I have written. I first got the idea from @Heyward43. It worked very well, but was limited by the small number of buttons available. I tried a mini keyboard, but putting labels on the very small keys didn’t work and I couldn’t remember the key assignments without labels. (Getting older sucks.) R… --- _[View the full topic](https://forum.sienci.com/t/gsender-altmill-9-key-pendant-keyboard/16497)._