# gSender decimal places

**URL:** <https://forum.sienci.com/t/gsender-decimal-places/6032>\
**Category:** 💡 Suggestion\
**Created:** [June 2, 2022, 6:59pm UTC](https://forum.sienci.com/t/gsender-decimal-places/6032 "2022-06-02T18:59:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jepho](https://forum.sienci.com/user_avatar/forum.sienci.com/jepho/32/3432_2.png) [@jepho](https://forum.sienci.com/u/jepho)\
**Post date:** [June 2, 2022, 6:59pm UTC](https://forum.sienci.com/t/gsender-decimal-places/6032/1 "2022-06-02T18:59:32Z")

</div>

Hello Sienci developers; I have a question regarding decimal places. I am using gSender from an Apple computer running Mac Os 11.6.6 (Big Sur).

It is a widely accepted convention for software to have a place to set user preferences under the software name in the title bar. I could not find a preferences set-up page for gSender.

I was hoping to change the standard two decimal places to three. I find this helpful when milling metal, which usually can tolerate a closer standard of accuracy than wood. I have been used to milling metal at a tolerance of ± 0.001" and I would like to be able to specify that if possible. Thank you.

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [November 28, 2022, 2:54pm UTC](https://forum.sienci.com/t/gsender-decimal-places/6032/2 "2022-11-28T14:54:48Z")

</div>

This is a feature in gSender Edge which will make it’s way into main release after testing - decimals places are configurable up to 5 SD accuracy.

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [November 28, 2022, 2:54pm UTC](https://forum.sienci.com/t/gsender-decimal-places/6032/3 "2022-11-28T14:54:51Z")

</div>