# Gsender disconnects

**URL:** <https://forum.sienci.com/t/gsender-disconnects/6215>\
**Category:** ❓ Question\
**Created:** [July 6, 2022, 12:22am UTC](https://forum.sienci.com/t/gsender-disconnects/6215 "2022-07-06T00:22:41Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [March 18, 2025, 9:06pm UTC](https://forum.sienci.com/t/gsender-disconnects/6215/21 "2025-03-18T21:06:45Z")

</div>

@rblondeau Two years ago, I said that using grbl mm or grbl inch VCarve does not allow for different tools in one toolpath. I stand by that.  
With respect, you are not using either of those posts. You have created a custom post.

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [August 12, 2025, 7:53pm UTC](https://forum.sienci.com/t/gsender-disconnects/6215/22 "2025-08-12T19:53:57Z")

</div>



[Previous page](https://forum.sienci.com/t/gsender-disconnects/6215.md?page=1)