# gSender missing info

**URL:** <https://forum.sienci.com/t/gsender-missing-info/6356>\
**Category:** 🐛 Bug\
**Created:** [July 25, 2022, 8:27pm UTC](https://forum.sienci.com/t/gsender-missing-info/6356 "2022-07-25T20:27:42Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Menglor](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/4bbf92/32.png) [@Menglor](https://forum.sienci.com/u/Menglor)\
**Post date:** [July 25, 2022, 8:27pm UTC](https://forum.sienci.com/t/gsender-missing-info/6356/1 "2022-07-25T20:27:42Z")

</div>

I know this is captain obvious but I’m going to post it anyway

 ![PXL_20220725_202510923](https://forum.sienci.com/uploads/default/original/2X/4/4eadacf947d786506485a8d94656bb485a7a3cb7.jpeg)

48x30 is missing

---

<div class="post-metadata">

**Author:** ![Menglor](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/4bbf92/32.png) [@Menglor](https://forum.sienci.com/u/Menglor)\
**Post date:** [July 25, 2022, 8:29pm UTC](https://forum.sienci.com/t/gsender-missing-info/6356/2 "2022-07-25T20:29:20Z")

</div>

Also, I’m kind of surprised there isn’t a drop-down for other where you can manually enter the numbers

Might be a way to do it but that’s where I would have expected to see it

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [August 2, 2022, 1:33pm UTC](https://forum.sienci.com/t/gsender-missing-info/6356/3 "2022-08-02T13:33:22Z")

</div>

Hi,

We’ll be adding profiles for the extension kits in the next build.

There is no need for a way to manually input numbers since the machine profile mostly informs the firmware tool what to use for flashing/default EEPROM now, and just shows the currently set EEPROM value for dimensions.

You should be able to customize the EEPROM dimensions in the firmware tool to the correct dimensions in the meantime if you have the extension kit - $130, $131, and $132 are the relevant settings. We’ll make sure there’s an easier route in the future.

Cheers,  
Kevin

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [September 12, 2022, 4:42pm UTC](https://forum.sienci.com/t/gsender-missing-info/6356/4 "2022-09-12T16:42:13Z")

</div>

Yes good spot @Menglor, profiles were missed adding for various reasons but are now there and machine profiles now moved to firmware tool to reflect the direct tie that presets and firmware have to one another 👍

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [September 12, 2022, 4:42pm UTC](https://forum.sienci.com/t/gsender-missing-info/6356/5 "2022-09-12T16:42:16Z")

</div>