# Gsender mm to inches

**URL:** <https://forum.sienci.com/t/gsender-mm-to-inches/8877>\
**Category:** ❓ Question\
**Created:** [May 25, 2023, 10:17pm UTC](https://forum.sienci.com/t/gsender-mm-to-inches/8877 "2023-05-25T22:17:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dhook](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/779978/32.png) [@dhook](https://forum.sienci.com/u/dhook)\
**Post date:** [May 25, 2023, 10:17pm UTC](https://forum.sienci.com/t/gsender-mm-to-inches/8877/1 "2023-05-25T22:17:38Z")

</div>

Gsender froze after completing a job. I exited out, shutting Gsender down. Restarted Gsender and now it is in mm and not inches. Can’t remember how to switch it back to inches.

---

<div class="post-metadata">

**Author:** ![ozguzzi](https://forum.sienci.com/letter_avatar_proxy/v4/letter/o/958977/32.png) [@ozguzzi](https://forum.sienci.com/u/ozguzzi)\
**Post date:** [May 26, 2023, 12:17am UTC](https://forum.sienci.com/t/gsender-mm-to-inches/8877/2 "2023-05-26T00:17:25Z")

</div>

Go up to the little gear in the top right corner, and then click the inches box.

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [August 6, 2025, 7:57pm UTC](https://forum.sienci.com/t/gsender-mm-to-inches/8877/3 "2025-08-06T19:57:18Z")

</div>