# Having trouble with male part of inlay

**URL:** <https://forum.sienci.com/t/having-trouble-with-male-part-of-inlay/9804>\
**Category:** 📄 General\
**Created:** [September 13, 2023, 2:28am UTC](https://forum.sienci.com/t/having-trouble-with-male-part-of-inlay/9804 "2023-09-13T02:28:42Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Shipwreck](https://forum.sienci.com/letter_avatar_proxy/v4/letter/s/c37758/32.png) [@Shipwreck](https://forum.sienci.com/u/Shipwreck)\
**Post date:** [September 13, 2023, 1:13pm UTC](https://forum.sienci.com/t/having-trouble-with-male-part-of-inlay/9804/4 "2023-09-13T13:13:10Z")

</div>

@hhrahman When i did my first I found this in the forums a gadget to help. Made my inlay process easy.

> [@Aspen Leaf Tapered Inlay Gadget](https://forum.sienci.com/t/aspen-leaf-tapered-inlay-gadget/6295):
>
> Free Stuff!! Used this gadget from the Vectric forum to create the male plug of the inlay. 0.125 flat depth for the female, 0.125 for the “A” dimension in the gadget and 0.05 for the “B” dimension in the gadget. Quick and easy math, mostly done with the gadget. The gadget works with Vcarve Pro and Aspire. [ASPEN LEAF TAPERED INLAY GADGET.zip](https://forum.sienci.com/uploads/short-url/faU2rpVwJw53xozYuB1QCJ0IOn.zip) (2.6 MB) Thinking about adding the leaf veins with a different type of wood…

---

_[View the full topic](https://forum.sienci.com/t/having-trouble-with-male-part-of-inlay/9804)._