# Hello from the newbie, **URL:** \ **Category:** 📄 General\ **Created:** [February 28, 2022, 3:36am UTC](https://forum.sienci.com/t/hello-from-the-newbie/5280 "2022-02-28T03:36:41Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![stevewiley](https://forum.sienci.com/letter_avatar_proxy/v4/letter/s/94ad74/32.png) [@stevewiley](https://forum.sienci.com/u/stevewiley)\ **Post date:** [February 28, 2022, 3:36am UTC](https://forum.sienci.com/t/hello-from-the-newbie/5280/1 "2022-02-28T03:36:41Z")
Hello all, I am going to buy the 30x30 LM. Is there anything I should consider before I buy? What add-ons should I purchase now, or later. where is the best place to learn software? What mistakes did some of you make when you bought your first machine? what bits should I start out with? I do know there is a significant learning curve to all of this. Thanks, Steve ---
**Author:** ![Jammer](https://forum.sienci.com/letter_avatar_proxy/v4/letter/j/df705f/32.png) [@Jammer](https://forum.sienci.com/u/Jammer)\ **Post date:** [February 28, 2022, 1:57pm UTC](https://forum.sienci.com/t/hello-from-the-newbie/5280/2 "2022-02-28T13:57:50Z")
@stevewiley, just make sure you love to solve problems and you’ll do fine. I’d mess with the CAD software to see if you have the ability to design/create what you think you’d like to use your CNC for. That was the biggest issue with me or concern. Being an IT tech guy I wasn’t to worried, but also know if you were to hate that part CNCing would not be enjoyable. Good Luck and know there are tons of people on here that are more than willing to help a guy out. ---
**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\ **Post date:** [February 28, 2022, 2:22pm UTC](https://forum.sienci.com/t/hello-from-the-newbie/5280/3 "2022-02-28T14:22:38Z")
@stevewiley Welcome to the group, Steve. You’ll find it THE place to come to for help and advice should you decide to buy a Long Mill. Even if you don’t and “gasp” buy a different brand, you’ll find help here with software and tooling. In terms of add-ons, much depends on what you plan to do with your Mill. Here is a recent thread from a Long Mill “waiter” who asked the same question: > [@What other items will I need when my MK2 arrives?](https://forum.sienci.com/t/what-other-items-will-i-need-when-my-mk2-arrives/5272): > > Greetings! As I posted in another thread, I pre-purchased a MK2 30x30 and am awaiting the shipment. With that said, I am wondering what else I will need to get up and carving? I have my plans for my workbench at 48”x60”, design software Vectric VCarve Pro and either an inexpensive Windows based laptop or my 2020 MacBook Pro running boot camp. I have a dust collector, although will need to go from a 4” hose to a 2” hose and include a grounding wire inside the hose. Here is my order: LongMill … @Jammer As an aside, welcome back, Jeff. Long time, no see you on the forum 😀 ---
**Author:** ![Jake](https://forum.sienci.com/user_avatar/forum.sienci.com/jake/32/2491_2.png) [@Jake](https://forum.sienci.com/u/Jake)\ **Post date:** [February 28, 2022, 6:15pm UTC](https://forum.sienci.com/t/hello-from-the-newbie/5280/4 "2022-02-28T18:15:47Z")
@stevewiley Welcome to the forum! Lots of great folks here that you can ask away! @Jammer welcome back! Did you order your long mill? If you have, how has it been going? @gwilki has been a fantastic resource for many here! Grant, you are appreciated 🙂 I ordered a refurbished dell laptop this morning. Just over 600.00. I feel better using that in the shop than my MacBook. It should be here next week. I got a middle of the road laptop, with a good processor and memory. They say you can run VCARVE on a hunk of granite, but think I will have enough to keep my mind occupied without worrying about a junk laptop. Once it ships, I will order my VCarve Pro and start back up with the tutorials. Again welcome! Jake ---
**Author:** ![Jammer](https://forum.sienci.com/letter_avatar_proxy/v4/letter/j/df705f/32.png) [@Jammer](https://forum.sienci.com/u/Jammer)\ **Post date:** [March 1, 2022, 12:59pm UTC](https://forum.sienci.com/t/hello-from-the-newbie/5280/5 "2022-03-01T12:59:31Z")
@Jake, yes I’ve had mine for two years this March. Love having it, mostly used for creating v-carve inlays in cutting boards, cribbage boards, and precision pieces for jigs I use around the shop. ---
**Author:** ![Jake](https://forum.sienci.com/user_avatar/forum.sienci.com/jake/32/2491_2.png) [@Jake](https://forum.sienci.com/u/Jake)\ **Post date:** [March 1, 2022, 1:54pm UTC](https://forum.sienci.com/t/hello-from-the-newbie/5280/6 "2022-03-01T13:54:15Z")
@Jammer Hey Jeff, thanks for responding! If it isn’t asking too much, put some pictures up of your creations! Don’t be modest. New folks like me love looking at things created with the LongMill. Have a great day! Jake