# Huge Upgrade to my dust collection system

**URL:** <https://forum.sienci.com/t/huge-upgrade-to-my-dust-collection-system/13462>\
**Category:** 💨 Dust\
**Created:** [August 9, 2024, 4:21pm UTC](https://forum.sienci.com/t/huge-upgrade-to-my-dust-collection-system/13462 "2024-08-09T16:21:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jake](https://forum.sienci.com/user_avatar/forum.sienci.com/jake/32/2491_2.png) [@Jake](https://forum.sienci.com/u/Jake)\
**Post date:** [August 9, 2024, 4:21pm UTC](https://forum.sienci.com/t/huge-upgrade-to-my-dust-collection-system/13462/1 "2024-08-09T16:21:16Z")

</div>

Hello! I have a single stage Jet dust collector with a Super Dust Deputy cyclone separator. Seems to do rather well. But my problem was I had to physically walk to my dust collector to turn it on and off. It runs on 240v which kept me from getting a standard plug in remote like Alexa.

Finally, after dealing with that for years, I broke down and bought a wireless remote switch off of Amazon. Literally, I took off the switch that was original equipment and replaced with the wireless remote switch. Cost wise was 19.95 and came with two remotes. I glued a magnet to one and keep it on my table saw. The other one is located at my LongMill.

I do not receive anything for recommending this, but I am sure others have the same issue.

Quite possibly the best 20 bucks I have spent in a long time for my shop.  
Enjoy!  
Jake

 ![IMG_3438](https://forum.sienci.com/uploads/default/original/2X/c/cff2839b0a6056a6ab7c1aaf82698f566ef7f3d3.jpeg)

---

<div class="post-metadata">

**Author:** ![Dart](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/7bcc69/32.png) [@Dart](https://forum.sienci.com/u/Dart)\
**Post date:** [August 11, 2024, 9:13pm UTC](https://forum.sienci.com/t/huge-upgrade-to-my-dust-collection-system/13462/2 "2024-08-11T21:13:09Z")

</div>

I installed the same unit a couple of years ago, and am happy to say it is holding up fine. Mine is wired for 220.