# Is Easel compatible with the altmill?

**URL:** <https://forum.sienci.com/t/is-easel-compatible-with-the-altmill/27047>\
**Category:** 📄 General\
**Created:** [September 3, 2026, 12:55pm UTC](https://forum.sienci.com/t/is-easel-compatible-with-the-altmill/27047 "2026-09-03T12:55:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![RickyPickering](https://forum.sienci.com/letter_avatar_proxy/v4/letter/r/6f9a4e/32.png) [@RickyPickering](https://forum.sienci.com/u/RickyPickering)\
**Post date:** [September 3, 2026, 12:55pm UTC](https://forum.sienci.com/t/is-easel-compatible-with-the-altmill/27047/1 "2026-09-03T12:55:41Z")

</div>

Does Easel work well with the Altmill? Do you have to use easel to control your machine or does it allow you to use G Sender?

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [September 3, 2026, 12:58pm UTC](https://forum.sienci.com/t/is-easel-compatible-with-the-altmill/27047/2 "2026-09-03T12:58:36Z")

</div>

Easel does not support connecting to grblHAL.

You should be able to export your design as gcode and open in the sender of your choice, including gSender. I think that’s what they recommend on their AltMill support page unless that’s changed recently.