# Is there a Gsender reference Manual?

**URL:** <https://forum.sienci.com/t/is-there-a-gsender-reference-manual/4631>\
**Category:** 🐛 Bug\
**Created:** [December 20, 2021, 3:49pm UTC](https://forum.sienci.com/t/is-there-a-gsender-reference-manual/4631 "2021-12-20T15:49:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![0so](https://forum.sienci.com/letter_avatar_proxy/v4/letter/0/a4c791/32.png) [@0so](https://forum.sienci.com/u/0so)\
**Post date:** [December 20, 2021, 3:49pm UTC](https://forum.sienci.com/t/is-there-a-gsender-reference-manual/4631/1 "2021-12-20T15:49:45Z")

</div>

Hi, new longmill owner here trying to figure out Gsender. Is there a tutorial or manual somewhere?

I have homing switches on the machine and wondering how to program different work areas. For example I want to be able to cut out a part at one home location then go to a different home location and work on another part.

Can this be done?

Also, not sure if this is a bug but I could not get Gsender to run the surfacing code it has built in. I started once and skipped a bunch of lines about a quarter of the way through.  
Now, each time I start the job, machine would lock. What am I missing?

Thanks for your help.

---

<div class="post-metadata">

**Author:** ![Heyward43](https://forum.sienci.com/user_avatar/forum.sienci.com/heyward43/32/369_2.png) [@Heyward43](https://forum.sienci.com/u/Heyward43)\
**Post date:** [December 20, 2021, 4:38pm UTC](https://forum.sienci.com/t/is-there-a-gsender-reference-manual/4631/2 "2021-12-20T16:38:42Z")

</div>

@0so - Follow this link to Sienci forum for docs - [Installation - gSender Docs](https://resources.sienci.com/view/gs-installation/). Also this link on Facebook for video on gSender by Chris Thorog - [gSender Guide, Tips, and FAQ - YouTube](https://www.youtube.com/watch?v=454pWYtZgBU) . There are many videos on YouTube. Just search for gSender. The different homing locations is call the “Work Coordinate System or WCS”. It allows you to set up 6 different homing locations. I think you can do more than 6 but I know there are 6 basic ones (G54 through G59). Check out IDC Woodcraft for YouTube video howto’s. As for the surfacing code issue I haven’t tried that yet. It wasn’t available when I did my spoilboard. Maybe someone else can chime in on that.

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [December 22, 2021, 9:34pm UTC](https://forum.sienci.com/t/is-there-a-gsender-reference-manual/4631/3 "2021-12-22T21:34:38Z")

</div>

@0so with the new 1.0.3 version just released is this something you still notice?

---

<div class="post-metadata">

**Author:** ![0so](https://forum.sienci.com/letter_avatar_proxy/v4/letter/0/a4c791/32.png) [@0so](https://forum.sienci.com/u/0so)\
**Post date:** [January 5, 2022, 11:46pm UTC](https://forum.sienci.com/t/is-there-a-gsender-reference-manual/4631/4 "2022-01-05T23:46:29Z")

</div>

Hi Chris,it appears to have gone away with the update.

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [January 6, 2022, 4:12pm UTC](https://forum.sienci.com/t/is-there-a-gsender-reference-manual/4631/5 "2022-01-06T16:12:55Z")

</div>

Closed on January 6, 2022, 4:12pm UTC


