# Laser driver hack

**URL:** <https://forum.sienci.com/t/laser-driver-hack/12433>\
**Category:** 🔥 Laser\
**Created:** [June 3, 2024, 9:47pm UTC](https://forum.sienci.com/t/laser-driver-hack/12433 "2024-06-03T21:47:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mike2](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@mike2](https://forum.sienci.com/u/mike2)\
**Post date:** [June 3, 2024, 9:47pm UTC](https://forum.sienci.com/t/laser-driver-hack/12433/1 "2024-06-03T21:47:57Z")

</div>

![20240603_155425](https://forum.sienci.com/uploads/default/original/2X/0/0f476977947d22a5dfd68945230eecdf788e314d.jpeg)

I didn’t like how the feet were just the ends of the screws so they were just long enough to install rubber cutting board feet and the small nut fit perfectly in the rubber to tighten up. So now it is much nicer on the table top.