# Laser lenses almost out

**URL:** <https://forum.sienci.com/t/laser-lenses-almost-out/6296>\
**Category:** 🔥 Laser\
**Created:** [July 16, 2022, 10:05pm UTC](https://forum.sienci.com/t/laser-lenses-almost-out/6296 "2022-07-16T22:05:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cruiser56](https://forum.sienci.com/letter_avatar_proxy/v4/letter/c/7ea924/32.png) [@Cruiser56](https://forum.sienci.com/u/Cruiser56)\
**Post date:** [July 16, 2022, 10:05pm UTC](https://forum.sienci.com/t/laser-lenses-almost-out/6296/1 "2022-07-16T22:05:49Z")

</div>

When I go to focus my lens it seems i have to almost completly unscrew. Its like its hanging on by a thread or 2. I have them come out if i try to get it closer. Why is this?

---

<div class="post-metadata">

**Author:** ![elbarsal](https://forum.sienci.com/user_avatar/forum.sienci.com/elbarsal/32/3345_2.png) [@elbarsal](https://forum.sienci.com/u/elbarsal)\
**Post date:** [July 16, 2022, 10:32pm UTC](https://forum.sienci.com/t/laser-lenses-almost-out/6296/2 "2022-07-16T22:32:47Z")

</div>

Can’t really say why - but try dropping the Z by 1 or 2 mm before focusing, then you’ll be in the middle of the thread. Hope that helps.
