# Laser not marking - Please Help!

**URL:** <https://forum.sienci.com/t/laser-not-marking-please-help/13121>\
**Category:** ❓ Something's Up\
**Created:** [July 18, 2024, 2:40pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121 "2024-07-18T14:40:37Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 18, 2024, 2:40pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/1 "2024-07-18T14:40:37Z")

</div>

Hi everyone,

So I’m really at a loss here. I have the Sienci Labs laser module. Currently running the G2 laser. I’ve worked a few projects through it and it worked great. Suddenly I am having an issue where it’s not marking at all and I don’t know why. I haven’t changed any settings from the previous jobs. The laser focuses and burns while focusing. I export the gcode from Lightburn and bring it to Gsender and it starts the job. Laser turns on and off, no marks on the wood. I’ve checked the firmware settings and they’re all correct. Seriously not idea what’s changed aside from I updated Lightburn and Gsender to the most recent versions.

Please help!

Thanks kindly!  
A

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 18, 2024, 3:09pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/2 "2024-07-18T15:09:15Z")

</div>

Hey Abradel,

Can it be that your S value got messed up in either gsender or lightburn?

 ![afbeelding](https://forum.sienci.com/uploads/default/original/2X/4/49b129eb3dd6f1bdf8ca94be5786f895fa1171a1.png)

[https://resources.sienci.com/view/lb-changing-eeprom-setting-s-value/](https://resources.sienci.com/view/lb-changing-eeprom-setting-s-value/)

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 1:02pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/3 "2024-07-19T13:02:40Z")

</div>

Definitely checked these settings at least a dozen times and no luck. Last night I fired up a gcode of a file that worked a month ago and nothing. Laser fires but no marks on the wood.

So I either have an issue with:

- Hardware (I really hope not! This laser is hardly used!)
- Firmware (Is there a list of what each setting should be?)
- Focusing (I’m pretty sure it’s focused correctly!)

(I’ve tried cleaning the lens and changing it out for an entire different lens. No luck)

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 19, 2024, 1:18pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/4 "2024-07-19T13:18:47Z")

</div>

Hey abradel,

Are you able to burn something when test-firing the laser in Gsender?

 ![afbeelding](https://forum.sienci.com/uploads/default/original/2X/3/30a5eec9485e481b90739352551b1285981fe165.png)

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 1:25pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/5 "2024-07-19T13:25:40Z")

</div>

Yup. That works as good as ever. Then I run the code and the laser moves, flashes, no burns. It says it’s moving at 60 in/min (which my math tells me is the correct 25.4mm/sec) and when it lights up it says “Power 255”

Still no marks on the wood though.

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 19, 2024, 1:29pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/6 "2024-07-19T13:29:30Z")

</div>

What are your settings in lightburn. Can you post the .lbn file. I can test it on my machine right now. It’s idling for a moment.

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 1:31pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/7 "2024-07-19T13:31:39Z")

</div>

[Coaster 1 LB.lbrn2](https://forum.sienci.com/uploads/short-url/qUXQxktWrAn33Ep1qVnTf2JfgZp.lbrn2) (3.2 MB)

Here you are! Please let me know if you see anything wonky. Thank you!

(What I really don’t understand is why my old gcodes no longer work either, the ones that successfully ran in the past. But the laser fires with the manual test/turning on. It makes me feel like it’s a gsender/firmware issue?)

I can confirm 30 is 255 and 31 is 1 (it won’t let me make it 0? It reverts it to 1) and laser is of course enabled.

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 19, 2024, 2:00pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/8 "2024-07-19T14:00:09Z")

</div>

My file runs smoothly and without hickups. Frankly these settings are way more agressive than what I usualy use. I mostly go no higher than 50% output.

I include the nc file I created with my slightly older lightburn install so you can see if it makes a difference.  
Please note that it will burn a single coaster dead centre xyzero.

[Coaster 1 LB.nc](https://forum.sienci.com/uploads/short-url/P16pB0kYjJZLUoDOQeeIbu5X6b.nc) (273.2 KB)

 ![Afbeelding van WhatsApp op 2024-07-19 om 15.59.02_5da9765f](https://forum.sienci.com/uploads/default/original/2X/6/648d36a62c2c9c78481f38cc5f183f0fed81fde5.jpeg)

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 2:03pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/9 "2024-07-19T14:03:02Z")

</div>

I’m not sure if this gives me hope or dread! lol

When you say “output” you mean the power? Dial it down to 50%?

Going to run this now and see what happens.

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 19, 2024, 2:06pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/10 "2024-07-19T14:06:46Z")

</div>

Running a diode laser full power gives it some more wear, according to, you know, the internetpeople. I find this logic, though have no proof of this, So I rather lower speed than up my output.

It however does not matter in this test. I’ve not tinkered your settings, I only used an older version of lightburn (1.5.06) and it runs fine on my side.

Lets see what it does and take it from there.

Your laser can burn so prolly not the cause. V  
Lightburn ?  
Gsender ?

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 2:16pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/11 "2024-07-19T14:16:42Z")

</div>

Nothing. Ran it through Lightburn and no go. Flashes, no marks.

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 19, 2024, 2:17pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/12 "2024-07-19T14:17:57Z")

</div>

You did use lightburn to send g-code?

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 2:22pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/13 "2024-07-19T14:22:19Z")

</div>

In Lightburn I clicked start.

Going to try saving the gcode and opening in gsender now.

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 19, 2024, 2:24pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/14 "2024-07-19T14:24:24Z")

</div>

You can load this CN file straight into gsender. I ran it in gesender just now.

But, if gsender doesn’t burn too, the next step will be the controller (Being longboard or SLB, whatever you have going in your shop?)

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 2:25pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/15 "2024-07-19T14:25:36Z")

</div>

It’s a longboard.

Sienci MK1

Something in the firmware must be off? I’ve tried 100 times to reflash and it says success, but then here we are.

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 2:30pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/16 "2024-07-19T14:30:09Z")

</div>

No marks in gsender with your file. Your file is also loading inverted (trying to fill in everything EXCEPT for the words/engravings)

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 19, 2024, 2:35pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/17 "2024-07-19T14:35:42Z")

</div>

I had a problem with the newer gsender versions so I wenmt down to an older one (1.2.2) and not having any problems anymore.

IT might be that an older version of gsender restores what is now scewed?

You can download 1.2.2 [here](https://github.com/Sienci-Labs/gsender/releases/tag/v1.2.2)

See if that gets you somewhere.

IT might look inverted in gsender but it came out nice. Got me a nice coaster out of this. 😉

 ![afbeelding](https://forum.sienci.com/uploads/default/original/2X/f/f829822084cd56485dbb1e5301ab382b80ddcd80.png)  
 ![Afbeelding van WhatsApp op 2024-07-19 om 16.35.01_3b39dd6f](https://forum.sienci.com/uploads/default/original/2X/b/b30c0e9d0009971df4eec9677f51b21c963b99c2.jpeg)

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 2:36pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/18 "2024-07-19T14:36:08Z")

</div>

Here’s the console from the first few flashes of light in gsender:

ok  
G1 X0.087Y0.004S0  
ok  
G1 X-0.258S255  
ok  
G1 X-8.9834S0  
ok  
G1 X-0.4812S255  
ok  
G1 X-4.2421S0  
ok  
G1 X-0.3877S255  
ok  
G1 X-0.0345Y0.0039S0  
ok  
G1 X0.4566S255  
ok  
G1 X4.1794S0  
ok  
G1 X0.5377S255  
ok  
G1 X4.3008S0  
ok  
G1 X0.2137S255  
ok  
G1 X4.3916S0  
G1 X0.3562S255  
ok  
ok  
G1 X0.0379Y0.0039S0  
ok  
G1 X-0.432S255  
ok  
G1 X-4.2983S0  
ok  
G1 X-0.3245S255  
ok  
G1 X-4.2187S0  
ok  
G1 X-0.2822S255  
ok  
G1 X-0.0267S0  
ok  
G1 X-0.2822S255  
ok  
G1 X-4.1222S0  
!  
\x18  
ok  
Grbl 1.1h [‘$’ for help] LongMill MK1 build Feb 7, 2022

---

<div class="post-metadata">

**Author:** ![Abradel](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/c5a1d2/32.png) [@Abradel](https://forum.sienci.com/u/Abradel)\
**Post date:** [July 19, 2024, 2:38pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/19 "2024-07-19T14:38:37Z")

</div>

Well now you’re just showing off lol.

Installing older version, we’ll see what happens (that’s all I can think of too. On this job I updated both lightburn and gsender. That’s literally all that’s different!)

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [July 19, 2024, 2:45pm UTC](https://forum.sienci.com/t/laser-not-marking-please-help/13121/20 "2024-07-19T14:45:44Z")

</div>

that and turn off the whole damn thing, have a beer and turn it on again tomorow and hope for the magic that happens when drinking beers.

[Next page](https://forum.sienci.com/t/laser-not-marking-please-help/13121.md?page=2)
