# Laser offset not working

**URL:** <https://forum.sienci.com/t/laser-offset-not-working/26599>\
**Category:** 🐛 Bug\
**Created:** [June 19, 2026, 8:27pm UTC](https://forum.sienci.com/t/laser-offset-not-working/26599 "2026-06-19T20:27:20Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![batr54](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/ebca7d/32.png) [@batr54](https://forum.sienci.com/u/batr54)\
**Post date:** [June 19, 2026, 8:27pm UTC](https://forum.sienci.com/t/laser-offset-not-working/26599/1 "2026-06-19T20:27:20Z")

</div>

Using 1,62 and latest firmware, Place values in offset boxes. When switch to laser and PWM the setup returns to where I started with spindle, not to where offset values should adjust to laser location. Any thoughts ??

Bart 54

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [June 23, 2026, 1:46pm UTC](https://forum.sienci.com/t/laser-offset-not-working/26599/2 "2026-06-23T13:46:45Z")

</div>

Is your laser on PWM or PWM2?

---

<div class="post-metadata">

**Author:** ![batr54](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/ebca7d/32.png) [@batr54](https://forum.sienci.com/u/batr54)\
**Post date:** [June 24, 2026, 12:09am UTC](https://forum.sienci.com/t/laser-offset-not-working/26599/3 "2026-06-24T00:09:35Z")

</div>

the laser an opt is on PMW2

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [June 26, 2026, 2:20pm UTC](https://forum.sienci.com/t/laser-offset-not-working/26599/4 "2026-06-26T14:20:25Z")

</div>

I’m seeing the expected behaviour on the latest grblHAL release. I’d need to know a bit more about your setup and specific board/firmware version (latest version for EXT is 20260525). You can see firmware version in the machine information dropdown:

 ![image](https://forum.sienci.com/uploads/default/original/2X/3/3cfdff525c2f99c73bfc01218249bb7907f66075.png)

On the SLB-ext running the above release, confirming that $770 and $771 are set in config:

 ![image](https://forum.sienci.com/uploads/default/original/2X/4/4053d7627d56cd838740277d230d378d384e6332.png)

Swapping from PWM (main spindle) to PWM2 (laser) correctly updates the offsets - I’m able to set zero point, swap to laser, then go to XY 0 and start the job. Offsets are handled on the firmware side entirely without gSender intervention as you can see in the console - we just send the spindle selection command and refresh the list.

Similarly, swapping back to regular spindle, the firmware is again correctly offsetting:

Things to share/double check on your end:

1. Which specific version of the firmware are you running - “latest” doesn’t help. The first new grblHAL release we did did not include laser offsets.
2. Double-check that you applied the offsets and not just entered them.
3. Confirm $772 is set to 0 (otherwise G92 is altered which would result in the offset seemingly not changing from your perspective):  
[REFERENCE: COMPLETE SETTINGS REFERENCE](https://petervanderwalt.github.io/grblhal_docs/04-Reference/03-complete-settings-reference.html#770-laser-x-offset)

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [October 1, 2026, 5:28pm UTC](https://forum.sienci.com/t/laser-offset-not-working/26599/5 "2026-10-01T17:28:45Z")

</div>

Closed on October 1, 2026, 5:28pm UTC


