# Leveling Issue X and Y axis

**URL:** <https://forum.sienci.com/t/leveling-issue-x-and-y-axis/4595>\
**Category:** ❓ Something's Up\
**Created:** [December 17, 2021, 1:58am UTC](https://forum.sienci.com/t/leveling-issue-x-and-y-axis/4595 "2021-12-17T01:58:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ccekella](https://forum.sienci.com/letter_avatar_proxy/v4/letter/c/91b2a8/32.png) [@ccekella](https://forum.sienci.com/u/ccekella)\
**Post date:** [December 17, 2021, 1:58am UTC](https://forum.sienci.com/t/leveling-issue-x-and-y-axis/4595/1 "2021-12-17T01:58:11Z")

</div>

When I go to cut the bit raises as it travels right and or up (X+ or Y+). My rails are level and so is my waste board. I have also checked square and everything appears square but. I am having trouble finding what is out of alignment that is causing me to not have a cut that is a consistent depth. Is there something that I can adjust or realign to fix this problem.

Thanks for the help

---

<div class="post-metadata">

**Author:** ![KbyK](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/e95f7d/32.png) [@KbyK](https://forum.sienci.com/u/KbyK)\
**Post date:** [June 22, 2022, 4:48pm UTC](https://forum.sienci.com/t/leveling-issue-x-and-y-axis/4595/2 "2022-06-22T16:48:13Z")

</div>

I am having the same issue. Can anyone chime in?