# Long Mill 30x30 t-track measurements

**URL:** <https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708>\
**Category:** 🛠️ Assembly\
**Created:** [December 28, 2021, 2:52pm UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708 "2021-12-28T14:52:06Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fancu12](https://forum.sienci.com/letter_avatar_proxy/v4/letter/f/ee7513/32.png) [@Fancu12](https://forum.sienci.com/u/Fancu12)\
**Post date:** [December 28, 2021, 2:52pm UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/1 "2021-12-28T14:52:06Z")

</div>

i don’t have my mill yet but i am doing a 48" t track table and was just wondering if someone could give me the width of the foot for the rail and the distance between the feet on the two individual rails. i wanted to make sure i didn’t end up with a t-track slot under one of the feet.  
thanks

---

<div class="post-metadata">

**Author:** ![CMFaub](https://forum.sienci.com/letter_avatar_proxy/v4/letter/c/9d8465/32.png) [@CMFaub](https://forum.sienci.com/u/CMFaub)\
**Post date:** [December 29, 2021, 1:42am UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/2 "2021-12-29T01:42:42Z")

</div>

If you sign up for a free onshape account you can see all of their CAD files and get all of the measurements for every part and even get the parts that you can reprint.

Just look in resources. The Long Mill is open source and they provide all CAD files.

---

<div class="post-metadata">

**Author:** ![mike99mac](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/3bc359/32.png) [@mike99mac](https://forum.sienci.com/u/mike99mac)\
**Post date:** [December 29, 2021, 2:17pm UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/3 "2021-12-29T14:17:06Z")

</div>

I just measured my four corner feet at 3-1/2" wide (four middle feet are smaller). I measured the width between the feet at 36-1/4"

Hope this helps.

```
-Mike M
```

---

<div class="post-metadata">

**Author:** ![Fancu12](https://forum.sienci.com/letter_avatar_proxy/v4/letter/f/ee7513/32.png) [@Fancu12](https://forum.sienci.com/u/Fancu12)\
**Post date:** [January 6, 2022, 5:25pm UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/5 "2022-01-06T17:25:45Z")

</div>

Thanks. i used those measurements then learned about the MK2. Cancelled my order and ordered the new longmill MK2. Looking at the drawings it should still work. Now just have to wait.  
Thanks again for the info.

---

<div class="post-metadata">

**Author:** ![rawarner](https://forum.sienci.com/letter_avatar_proxy/v4/letter/r/ecae2f/32.png) [@rawarner](https://forum.sienci.com/u/rawarner)\
**Post date:** [January 17, 2022, 8:26pm UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/6 "2022-01-17T20:26:33Z")

</div>

The feet on the MK2 are clearly different than the MK1, but I don’t see files for the MK2. Am I missing something?

---

<div class="post-metadata">

**Author:** ![Fancu12](https://forum.sienci.com/letter_avatar_proxy/v4/letter/f/ee7513/32.png) [@Fancu12](https://forum.sienci.com/u/Fancu12)\
**Post date:** [January 18, 2022, 12:07am UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/7 "2022-01-18T00:07:23Z")

</div>

all i could see was the pdf files that show height. i didn’t see anything about the width.

---

<div class="post-metadata">

**Author:** ![rawarner](https://forum.sienci.com/letter_avatar_proxy/v4/letter/r/ecae2f/32.png) [@rawarner](https://forum.sienci.com/u/rawarner)\
**Post date:** [January 18, 2022, 12:31am UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/8 "2022-01-18T00:31:33Z")

</div>

Yeah, okay so it’s not just me. 😉

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [January 21, 2022, 2:11pm UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/9 "2022-01-21T14:11:42Z")

</div>

@Fancu12@rawarner Kelly announced here when the new model specs will be available.

> [@The LongMill MK2 is here](https://forum.sienci.com/t/the-longmill-mk2-is-here/4746):
>
> Hey everyone! Our info page and order page for the LongMill MK2 12x30 and 30x30 is now live! Learn more here: [https://sienci.com/2021/12/30/all-about-the-longmill-mk2/](https://sienci.com/2021/12/30/all-about-the-longmill-mk2/) The LongMill MK2 platform acts as a stepping stone in bringing hobby CNCing to the masses, improving overall performance and assembly for the customer, as well as improving manufacturability and scale for us as a company. The LongMill MK2 can be ordered here: [https://sienci.com/product/longmill-mk2/](https://sienci.com/product/longmill-mk2/) [longmill mk2 30x30]

I hope this helps with your plans.

---

<div class="post-metadata">

**Author:** ![rawarner](https://forum.sienci.com/letter_avatar_proxy/v4/letter/r/ecae2f/32.png) [@rawarner](https://forum.sienci.com/u/rawarner)\
**Post date:** [January 29, 2022, 12:23am UTC](https://forum.sienci.com/t/long-mill-30x30-t-track-measurements/4708/10 "2022-01-29T00:23:12Z")

</div>

I got the following info from Sienci. It’s exactly what I was looking for. The measurements are for the new style MK2 y-axis rail feet.

“The foot size is 115mm wide by 50mm deep for the end feet and 78mm wide b 40 deep for the middle feet. They’re about 900mm apart so if your material is slightly undersized from 900mm then it’ll fit between the feet. And actually since the feet are tapered you can fit material slightly wider if you hold it higher up off the waste board.”
