# Looking for some help with an AltMill 4×4 AutoZero issue

**URL:** https://forum.sienci.com/t/looking-for-some-help-with-an-altmill-4x4-autozero-issue/26747
**Category:** ❓ Something's Up
**Created:** [July 19, 2026, 10:34pm UTC](https://forum.sienci.com/t/looking-for-some-help-with-an-altmill-4x4-autozero-issue/26747 "2026-07-19T22:34:25Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![Chucky\_ott](https://forum.sienci.com/user_avatar/forum.sienci.com/chucky_ott/32/8692_2.png) [@Chucky\_ott](https://forum.sienci.com/u/Chucky_ott)
#### Post date: [July 20, 2026, 5:54am UTC](https://forum.sienci.com/t/looking-for-some-help-with-an-altmill-4x4-autozero-issue/26747/4 "2026-07-20T05:54:07Z")

</div>

@Schurter FYI, the post I was referring to is here: [Add soft limit checks on X and Y when probing - #12 by Chucky\_ott](https://forum.sienci.com/t/add-soft-limit-checks-on-x-and-y-when-probing/25792/12)

I’m guessing it describes your problem. Sienci acknowledged that this is by design but that they might add some logic to not trigger the limit alarm when proving.

---

_[View the full topic](https://forum.sienci.com/t/looking-for-some-help-with-an-altmill-4x4-autozero-issue/26747)._