# Low profile waste board clamps

**URL:** <https://forum.sienci.com/t/low-profile-waste-board-clamps/11264>\
**Category:** 📛 Others\
**Created:** [February 15, 2024, 6:55pm UTC](https://forum.sienci.com/t/low-profile-waste-board-clamps/11264 "2024-02-15T18:55:46Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![\_Michael](https://forum.sienci.com/user_avatar/forum.sienci.com/_michael/32/2962_2.png) [@\_Michael](https://forum.sienci.com/u/_Michael)\
**Post date:** [February 16, 2024, 11:04am UTC](https://forum.sienci.com/t/low-profile-waste-board-clamps/11264/4 "2024-02-16T11:04:22Z")

</div>

Not sure what you use for CAD/CAM but I uploaded [some clamp files for Vectric](https://forum.sienci.com/t/free-vectric-clamp-files/8496). I have had good luck with those clamps. They aren’t hard to design if you use something other than Vectric.

Good luck with whatever clamps you decide to use!

---

_[View the full topic](https://forum.sienci.com/t/low-profile-waste-board-clamps/11264)._