# Made a sign....learned how to edit nodes

**URL:** <https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423>\
**Category:** 💥 Amazing fail\
**Created:** [October 28, 2026, 5:02pm UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423 "2026-10-28T17:02:57Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![beerbarrel](https://forum.sienci.com/user_avatar/forum.sienci.com/beerbarrel/32/10354_2.png) [@beerbarrel](https://forum.sienci.com/u/beerbarrel)\
**Post date:** [October 28, 2026, 5:02pm UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/1 "2026-10-28T17:02:57Z")

</div>

![2837-_1_](https://forum.sienci.com/uploads/default/original/2X/f/f89b3939c69c39db40f1f08b8bf43f4004a2072e.jpeg)

 ![PXL_20261028_165036571](https://forum.sienci.com/uploads/default/original/2X/5/5c349721df926dff1b676af5f782d4f3ca478f1a.jpeg) Took a pic at this place in Myrtl Beach. My buddy wanted a sign so I made…had to do a lot of tracing and node edit but learned a lot!

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [October 28, 2026, 7:11pm UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/2 "2026-10-28T19:11:42Z")

</div>

@beerbarrel Well done, Tracy.

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [October 29, 2026, 5:50am UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/3 "2026-10-29T05:50:52Z")

</div>

The original looks kinda lame compared to your improved version. I love it. How did you manage the bite part.. Small mill or did you use a saw of some kind to get it pointy?

What cad did you use? Did you use some kind of rptrace function and needed to correct the result or did you trace the whole thing by hand?

---

<div class="post-metadata">

**Author:** ![CuttingTheCrapAlex](https://forum.sienci.com/letter_avatar_proxy/v4/letter/c/f05b48/32.png) [@CuttingTheCrapAlex](https://forum.sienci.com/u/CuttingTheCrapAlex)\
**Post date:** [October 29, 2026, 8:09am UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/4 "2026-10-29T08:09:10Z")

</div>

Looking sharp!! Great translation of the original with a lot more character. Looks like good paint job as well. How did you do that?

---

<div class="post-metadata">

**Author:** ![beerbarrel](https://forum.sienci.com/user_avatar/forum.sienci.com/beerbarrel/32/10354_2.png) [@beerbarrel](https://forum.sienci.com/u/beerbarrel)\
**Post date:** [October 29, 2026, 8:25pm UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/5 "2026-10-29T20:25:13Z")

</div>

Thx Eddie…I used a 1/8 compression bit. It did leave the corners a little rounded but I hit it with some sandpaper where I could to square up the inside corners. I used Inkscape to clean it up and trace the best I could.

---

<div class="post-metadata">

**Author:** ![beerbarrel](https://forum.sienci.com/user_avatar/forum.sienci.com/beerbarrel/32/10354_2.png) [@beerbarrel](https://forum.sienci.com/u/beerbarrel)\
**Post date:** [October 29, 2026, 8:26pm UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/6 "2026-10-29T20:26:47Z")

</div>

Thx Alex…I cut the letters first painted them then glued them on…I cheated a little I guess. If you look at they S’s they look a little larger than the other letters but they are that way on the original sign.

---

<div class="post-metadata">

**Author:** ![CuttingTheCrapAlex](https://forum.sienci.com/letter_avatar_proxy/v4/letter/c/f05b48/32.png) [@CuttingTheCrapAlex](https://forum.sienci.com/u/CuttingTheCrapAlex)\
**Post date:** [October 29, 2026, 8:37pm UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/7 "2026-10-29T20:37:10Z")

</div>

Ah smart! You did a good job on lining them up in that case.

---

<div class="post-metadata">

**Author:** ![Pat1](https://forum.sienci.com/letter_avatar_proxy/v4/letter/p/43a26b/32.png) [@Pat1](https://forum.sienci.com/u/Pat1)\
**Post date:** [November 5, 2026, 2:54am UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/8 "2026-11-05T02:54:12Z")

</div>

Looks great. You must has done an excellent job in Node editing because the outcome looks amazing. Good job.

---

<div class="post-metadata">

**Author:** ![beerbarrel](https://forum.sienci.com/user_avatar/forum.sienci.com/beerbarrel/32/10354_2.png) [@beerbarrel](https://forum.sienci.com/u/beerbarrel)\
**Post date:** [November 9, 2026, 3:46pm UTC](https://forum.sienci.com/t/made-a-sign-learned-how-to-edit-nodes/27423/10 "2026-11-09T15:46:52Z")

</div>

Thanks…and it was the letters than required most of the work. I traced the picture in inkscape and worked from there. There were quite a number of un-needed nodes.
