# Method to Hold Piece Vertical to the Surface

**URL:** <https://forum.sienci.com/t/method-to-hold-piece-vertical-to-the-surface/25019>\
**Category:** 📄 General\
**Created:** [November 22, 2025, 7:25pm UTC](https://forum.sienci.com/t/method-to-hold-piece-vertical-to-the-surface/25019 "2025-11-22T19:25:27Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Jens](https://forum.sienci.com/letter_avatar_proxy/v4/letter/j/d2c977/32.png) [@Jens](https://forum.sienci.com/u/Jens)\
**Post date:** [November 22, 2025, 8:48pm UTC](https://forum.sienci.com/t/method-to-hold-piece-vertical-to-the-surface/25019/2 "2025-11-22T20:48:53Z")

</div>

There are various mount methods mentioned on this site. I have a vertical mounting surface at the front of my mill (which requires an extra router and mount), other people use a hole cut into the table to mount material that way. Have a look at this thread: [https://forum.sienci.com/t/altmill-vertical-milling-thoughts/14989/4](https://forum.sienci.com/t/altmill-vertical-milling-thoughts/14989/4) . I would like to point out that there are a number of joint types that do not require vertical mounting.

---

_[View the full topic](https://forum.sienci.com/t/method-to-hold-piece-vertical-to-the-surface/25019)._