# Mk3 end of job behaviour

**URL:** <https://forum.sienci.com/t/mk3-end-of-job-behaviour/27202>\
**Category:** ❓ Question\
**Created:** [October 2, 2026, 11:23pm UTC](https://forum.sienci.com/t/mk3-end-of-job-behaviour/27202 "2026-10-02T23:23:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [October 2, 2026, 11:23pm UTC](https://forum.sienci.com/t/mk3-end-of-job-behaviour/27202/1 "2026-10-02T23:23:47Z")

</div>

Mk3 SLB-Lite gSender 1.6.4

At the end of a job, the Autospin shuts off when the toolpath has been completed. After several seconds, the machine rises in Z and returns to XYZ0.  
Previously, on my SLB, at the end of the carve, with the router still running, the machine rose in Z, moved to XY0, then turned off the autospin.  
Can someone please tell me the eeprom settings that I need to change so that the Mk3 handles like the SLB did/