# Mountain range relief carved into Cedar cookie

**URL:** <https://forum.sienci.com/t/mountain-range-relief-carved-into-cedar-cookie/27075>\
**Category:** 🪑 Projects\
**Created:** [September 8, 2026, 10:17pm UTC](https://forum.sienci.com/t/mountain-range-relief-carved-into-cedar-cookie/27075 "2026-09-08T22:17:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Colin](https://forum.sienci.com/user_avatar/forum.sienci.com/colin/32/11761_2.png) [@Colin](https://forum.sienci.com/u/Colin)\
**Post date:** [September 8, 2026, 10:17pm UTC](https://forum.sienci.com/t/mountain-range-relief-carved-into-cedar-cookie/27075/1 "2026-09-08T22:17:31Z")

</div>

A friend of mine recently asked ‘can you do mountain ranges?’ and I said yes, without having actually done any long-form relief carving before, so there was a bit of learning to do.

Using my Altmill with Sienci ATC, I first faced the cookie flat on the back side, then the top side, and once the blank was ready. Note: the cookie was very dry and well-aged, so I didn’t have any issues with cracking or warping.

 ![Facing the cookie with 1" shell mill](https://forum.sienci.com/uploads/default/original/2X/9/92b38ef5530b6ecc58a3f71bdd23c31feb7c66a8.jpeg)

Added a little water, to see the colour.

 ![32bcf7457e0605734e1b390b0cb9df0a83164e87_2_999x750](https://forum.sienci.com/uploads/default/original/2X/0/09670eacdc5be293190ed31c0290428e3e553cb6.jpeg)

Next step was to program the job. The final use case here is a coffee table, so the cutout will get a 12" x 16" piece of 0.25" thick glass. I designed a 0.25" deep pocket to fit that glass and added +0.030" for clearance, then added dogbone corners. I also added a 0.125" lip around the perimeter.

 ![Dogbone corners](https://forum.sienci.com/uploads/default/original/2X/7/718d5e8210427778b8ca3c58b331b1a51d2a0dc4.png)

 ![MillMage depth map and operations list](https://forum.sienci.com/uploads/default/original/2X/3/3d3a8cd20eb5ade0f127fe92afa253bd04367168.jpeg)

**Full disclosure** : I work for LightBurn Software (hello from your friendly neighborhood Support team), so I’m using MillMage, which (as of a few hours prior to this post) just released MillMage 0.9, including our Pro features like V-carving and relief milling, which I use here. I don’t want to shill too hard here, but if you’re keen to read more, I’ll leave[this link](https://lightburnsoftware.com/blogs/news/millmage-pro-has-arrived-v-carving-relief-carving-true-nesting-and-more). Back to the project.

The mountain range comes from [Maker.Studio](https://maker.studio/)- which will soon be integrated into Web Tools to run right from within MillMage, but for now I pulled in the enormous ~200MB .stl, then converted it to a depth map.

## Roughing strategy

> **[New video · Friday, Sep 4 🎬](https://photos.google.com/share/AF1QipNPoDMvh5Nqv_tDfADGIA609m2ciaRqLMN4QoS4s81BMVNrNFFgicz3qTRZJ8QiPQ?key=cVhYcnBLNHFmNXF1cV85OS1hdGg3bGFlU2RPSElR)**

 ![MillMage Toolpaths list](https://forum.sienci.com/uploads/default/original/2X/1/1a6bd508fafd7bd6a51214b26402943ead65f187.png)

For roughing I used a 1/4" diameter 2FL Downcut square endmill, with a 1.25" flute length.

I set a top height of 0.25" (below the lip for the glass) and a depth of 1.5", with 0.25" DOC .040" radial WOC. 18000RPM, Feedrate 140IPM

> **[New video · Friday, Sep 4 🎬](https://photos.google.com/share/AF1QipMBK9PCMovsVzxolqmwJhjAoITscXRCm2q37GZ02Y0DjhBNZh0GfWTr6GuvEJQzVQ?key=TlV3eXJ3VWM5VTZvLTZXdXBKY1QtcUFrZVNjaDZB)**

With roughing complete, we’re on to finishing

 ![Cookie roughed out with 1/4" dia sq endmill](https://forum.sienci.com/uploads/default/original/2X/9/9056ee244f077b3e006320e1a0e46c348e694f51.jpeg)

## Finishing

Using a 1/16 tip 10deg tapered ball mill, 1/4" shank

Full 1.25" DOC  
.010" Stepover (4%)  
22000 RPM

> **[New video · Friday, Sep 4 🎬](https://photos.google.com/share/AF1QipMuvwpNxgt38joemXrfswM-4rlkv2-SCl8Uhsdw_RGcUJloZqiloZPyGbvjG18j_Q?key=NHhYM0pGOFhFdVJVOVdDVFhpemY5dWxWMFpEcUV3)**

## Final result

 ![Finished cookie in natural light](https://forum.sienci.com/uploads/default/original/2X/6/694fbe1c015f362072dc0dedf22b8b11be7c2302.jpeg)

 ![Cookie under task lighting in the shop](https://forum.sienci.com/uploads/default/original/2X/6/65bfb21136447281684d45fd27488dd31e7bf443.jpeg)

## Final thoughts

The Altmill with ATC is working great, and didn’t skip a beat on this ~5.5hr USB streamed final pass.

I’ve attached my 4x4 Altmill w/ATC bundle if anyone else wants to give MillMage a try. The ATC runs entirely with Sienci’s-own macros via the firmware so it’s super reliable. At this moment we don’t have the Autozero touchoff plate built-in, but you _can_ still use it for Z touchoff. Soon it will be a 1 click ‘use this tool block’ preset.

For those wondering, the mountain range is near the [Goat range](https://maps.app.goo.gl/bdszz6CrGWybdhuNA), just a few hours from where I live in the Kootenays of BC.

Next up:

[Altmill 4x4 w ATC.mmzip](https://forum.sienci.com/uploads/short-url/jxtKNpn0x7lk0k3jZfgFnhrQbqS.mmzip) (10.7 KB)

I 3D scanned a guitar from a local crafter, and I’m going to replicate it to near-net shape so he can produce more of them.

 ![skull guitar](https://forum.sienci.com/uploads/default/original/2X/a/a12366354ede725fe29201180eeef4a05a544db6.jpeg)

Let me know what you think or ask away if you have questions.

---

<div class="post-metadata">

**Author:** ![Chucky\_ott](https://forum.sienci.com/user_avatar/forum.sienci.com/chucky_ott/32/8692_2.png) [@Chucky\_ott](https://forum.sienci.com/u/Chucky_ott)\
**Post date:** [September 8, 2026, 10:27pm UTC](https://forum.sienci.com/t/mountain-range-relief-carved-into-cedar-cookie/27075/2 "2026-09-08T22:27:36Z")

</div>

@Colin Nice work. I always appreciate when people post the various stages of a project.

Nice work on the guitar, even if it did trigger my trypophobia 😆

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [September 8, 2026, 10:29pm UTC](https://forum.sienci.com/t/mountain-range-relief-carved-into-cedar-cookie/27075/3 "2026-09-08T22:29:37Z")

</div>

@Colin Thanks for posting the process. The end result is really remarkable.
