# My LM setup with right side electronics

**URL:** https://forum.sienci.com/t/my-lm-setup-with-right-side-electronics/4028
**Category:** 🧰 CNC Setup
**Created:** [October 31, 2021, 6:15pm UTC](https://forum.sienci.com/t/my-lm-setup-with-right-side-electronics/4028 "2021-10-31T18:15:37Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![\_Michael](https://forum.sienci.com/user_avatar/forum.sienci.com/_michael/32/2962_2.png) [@\_Michael](https://forum.sienci.com/u/_Michael)
#### Post date: [October 31, 2021, 6:15pm UTC](https://forum.sienci.com/t/my-lm-setup-with-right-side-electronics/4028/1 "2021-10-31T18:15:37Z")

</div>

First off, hello to all as I am new here. I thought I would share some photos of my setup with the controls mounted on the right side. I mounted the X motor on the right side and flipped the direction in the firmware. Other mods needed for right side controls were fabrication of a bracket for the Y drag chain and drilling a hole to mount the X drag chain. I also needed to extend the cables for the X and Z limit sensors.

 ![IMG_20211030_215341](https://forum.sienci.com/uploads/default/original/2X/e/e46349d29aca0d7c05c544a77de0cf8b2348d4e8.jpeg)  
 ![IMG_20211030_215151](https://forum.sienci.com/uploads/default/original/2X/5/5f2f39da24bada2433f8ff737f9ab9c007869a4c.jpeg) ![IMG_20211030_215533](https://forum.sienci.com/uploads/default/original/2X/2/2156fe47f94fd0cd12a34c77e5e41375a9048505.jpeg)  
 ![IMG_20211030_215509](https://forum.sienci.com/uploads/default/original/2X/d/de5707e973973c9268c58010eb79a7e28c484f6a.jpeg)  
 ![IMG_20211030_215436](https://forum.sienci.com/uploads/default/original/2X/4/4b5bd1e2c92e4902dd9db6e34c216e43c57eb01f.jpeg)  
 ![IMG_20211030_214744](https://forum.sienci.com/uploads/default/original/2X/4/4510f52c6276956ed59e986228303e0e2dc8bf75.jpeg)