# Order placed for 30 x 30 **URL:** \ **Category:** 📄 General\ **Created:** [June 20, 2023, 2:00am UTC](https://forum.sienci.com/t/order-placed-for-30-x-30/9108 "2023-06-20T02:00:28Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![GettingStarted](https://forum.sienci.com/letter_avatar_proxy/v4/letter/g/a6a055/32.png) [@GettingStarted](https://forum.sienci.com/u/GettingStarted)\ **Post date:** [June 20, 2023, 2:00am UTC](https://forum.sienci.com/t/order-placed-for-30-x-30/9108/1 "2023-06-20T02:00:28Z")
I just placed my order for the 30 x 30, I am so excited to get this. Now I need to start thinking on my table build. Any suggestions on a good starter kit for cutting bits? Sienci is currently on back order. ---
**Author:** ![Swinly](https://forum.sienci.com/letter_avatar_proxy/v4/letter/s/82dd89/32.png) [@Swinly](https://forum.sienci.com/u/Swinly)\ **Post date:** [June 20, 2023, 2:51am UTC](https://forum.sienci.com/t/order-placed-for-30-x-30/9108/2 "2023-06-20T02:51:37Z")
Do you know what kind of projects you will be making or are you like I was and had no clue but I wanted to make all the cool stuff? Get it out of the way now and accept that you will likely break a bit or two initially. With that in mind, I would avoid buying any expensive bits. These are the bits I frequently utilized in the beginning. 1 inch or bigger surfacing bit 1/4 up cut endmill 1/4 down cut endmill 1/8 endmill 90-degree Vbit 1/2 60-degree Vbit 1/2 1/8 collet (avoid the reducers) For 3D projects 1/16 tapered ball nose ---
**Author:** ![\_Michael](https://forum.sienci.com/user_avatar/forum.sienci.com/_michael/32/2962_2.png) [@\_Michael](https://forum.sienci.com/u/_Michael)\ **Post date:** [June 20, 2023, 3:01am UTC](https://forum.sienci.com/t/order-placed-for-30-x-30/9108/3 "2023-06-20T03:01:50Z")
That’s a good list IMHO, can do a lot with those, I’d add a 1/8 and 1/4 inch ball nose because I do a lot with the moulding tool paths and rounded bottom pockets but that’s just me and after the ones you mentioned. ---
**Author:** ![ozguzzi](https://forum.sienci.com/letter_avatar_proxy/v4/letter/o/958977/32.png) [@ozguzzi](https://forum.sienci.com/u/ozguzzi)\ **Post date:** [June 20, 2023, 3:35am UTC](https://forum.sienci.com/t/order-placed-for-30-x-30/9108/4 "2023-06-20T03:35:10Z")
[IDCWoodcraft.com](http://IDCWoodcraft.com) has a nice starter set of bits. Great company to work with also. ---
**Author:** ![GettingStarted](https://forum.sienci.com/letter_avatar_proxy/v4/letter/g/a6a055/32.png) [@GettingStarted](https://forum.sienci.com/u/GettingStarted)\ **Post date:** [June 20, 2023, 9:43am UTC](https://forum.sienci.com/t/order-placed-for-30-x-30/9108/5 "2023-06-20T09:43:45Z")
@ozguzzi, I ordered the starter set last night from IDC, it looks like a very nice set.