# Problem with carveco or gsrnder

**URL:** <https://forum.sienci.com/t/problem-with-carveco-or-gsrnder/10329>\
**Category:** CarveCo\
**Created:** [November 16, 2023, 3:30pm UTC](https://forum.sienci.com/t/problem-with-carveco-or-gsrnder/10329 "2023-11-16T15:30:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tomconrad](https://forum.sienci.com/letter_avatar_proxy/v4/letter/t/f14d63/32.png) [@tomconrad](https://forum.sienci.com/u/tomconrad)\
**Post date:** [November 16, 2023, 3:30pm UTC](https://forum.sienci.com/t/problem-with-carveco-or-gsrnder/10329/1 "2023-11-16T15:30:27Z")

</div>

No matter what I do in craveco mm or inch’s when I send to gsender the visualizer does not scale it to what it should be

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [November 16, 2023, 3:41pm UTC](https://forum.sienci.com/t/problem-with-carveco-or-gsrnder/10329/2 "2023-11-16T15:41:56Z")

</div>

@tomconrad Welcome to the group, Tom.

I have moved your post to the Carveco topic. We have other members running Carveco and I’m sure that they will be able to help you out.

---

<div class="post-metadata">

**Author:** ![Swinly](https://forum.sienci.com/letter_avatar_proxy/v4/letter/s/82dd89/32.png) [@Swinly](https://forum.sienci.com/u/Swinly)\
**Post date:** [November 16, 2023, 7:52pm UTC](https://forum.sienci.com/t/problem-with-carveco-or-gsrnder/10329/3 "2023-11-16T19:52:56Z")

</div>

When you saved your tool paths in Carveco did you save it with the correct machine file format? If you are wanting inchs - UGS GRBL (inch) (\*.gcode)

 ![image](https://forum.sienci.com/uploads/default/original/2X/1/10b924531bcc7fee689811e3a4aa305c4b6df2fc.png)