# Problems with very early version of gSender

**URL:** <https://forum.sienci.com/t/problems-with-very-early-version-of-gsender/3536>\
**Category:** 💥 Amazing fail\
**Created:** [March 18, 2021, 8:54pm UTC](https://forum.sienci.com/t/problems-with-very-early-version-of-gsender/3536 "2021-03-18T20:54:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![marzvt](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/bbe5ce/32.png) [@marzvt](https://forum.sienci.com/u/marzvt)\
**Post date:** [March 18, 2021, 8:54pm UTC](https://forum.sienci.com/t/problems-with-very-early-version-of-gsender/3536/1 "2021-03-18T20:54:14Z")

</div>

I keep having dropouts with Gcode sender. Even when I’m jogging the machine around with the keyboard. The Topo sign done in Vectric the most I got was 2 hours in with Gcode Sender. Finally I gave up and cut it in UGS without a problem. The cutting board done in Fusion 360 Gcode sender failed once on the rough pass, cut the finish pass fine, then failed 7 times on the cutout pass till I gave up and just finished cutting it out on a band saw. I do alot of longer jobs and I am really having a problem with reliability with the new app.

 ![20210312_083254](https://forum.sienci.com/uploads/default/original/2X/c/ccbf61f7a7e8726847bf197aab7e937c3a695ed9.jpeg) ![20210317_163212](https://forum.sienci.com/uploads/default/original/2X/7/7e9904de4735a65350b9fa7d8b6d3a3284a7e6bd.jpeg)