# Robb Smith's Parametric Finger Jointed Box

**URL:** <https://forum.sienci.com/t/robb-smiths-parametric-finger-jointed-box/4774>\
**Category:** ✨ Freebies\
**Created:** [January 1, 2022, 12:44am UTC](https://forum.sienci.com/t/robb-smiths-parametric-finger-jointed-box/4774 "2022-01-01T00:44:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [January 1, 2022, 12:44am UTC](https://forum.sienci.com/t/robb-smiths-parametric-finger-jointed-box/4774/1 "2022-01-01T00:44:44Z")

</div>

Robb kindly provided his openSCAD files and his .stl files for his take on a mid-century TV cabinet featuring remarkable hidden joinery. The cabinet houses an older smart phone.

Here is a link to his post with pics of his completed project:

> [@Parametric finger-jointed box with example application](https://forum.sienci.com/t/parametric-finger-jointed-box-with-example-application/4767):
>
> I’m repurposing my wife’s old smartphone as a smart speaker/voice assistant, so I made this project case in the style of a mid-century TV cabinet to house the phone, speakers, amp and power supply. This was cut from 5mm red oak veneer plywood (sold to me as 1/4" incidentally - I need to keep a pair of calipers in the car!). I’m still working on getting OpenSCAD to generate some nice looking mid-century-style curvy splayed legs, so more on this later. In the meantime, I thought the community …

Here are the zipped files of the scad files:

[parametric\_box - v1.6.scad.zip](https://forum.sienci.com/uploads/short-url/pPoguN0gS1CJPWY5YCtu5xIDUb.zip) (2.6 KB)

[tv\_case - v1.3.scad.zip](https://forum.sienci.com/uploads/short-url/zd0LPy0V4SZ3aQTBZS51YX8L3vz.zip) (5.0 KB)

Here is the zipped file for the stl files

[stl files.zip](https://forum.sienci.com/uploads/short-url/efhDy2tFOQQe92UepMK93uP5d9y.zip) (3.1 MB)

Edit: Rob has updated these files from the previously-posted versions

Updates in these versions:

- Corrected a bug in the finger joint positioning (opposite sides of a given panel were not quite in alignment)

- Made the spacing between parts a function of the router bit diameter so it resizes automatically if a different bit is used

- Rotated the right-hand side of the box in the machining view so the orientation of the grain will be consistent in the final box

---

<div class="post-metadata">

**Author:** ![Swinly](https://forum.sienci.com/letter_avatar_proxy/v4/letter/s/82dd89/32.png) [@Swinly](https://forum.sienci.com/u/Swinly)\
**Post date:** [January 1, 2022, 2:16am UTC](https://forum.sienci.com/t/robb-smiths-parametric-finger-jointed-box/4774/2 "2022-01-01T02:16:31Z")

</div>

Very cool design thanks @Robbs

---

<div class="post-metadata">

**Author:** ![\_Michael](https://forum.sienci.com/user_avatar/forum.sienci.com/_michael/32/2962_2.png) [@\_Michael](https://forum.sienci.com/u/_Michael)\
**Post date:** [September 8, 2022, 10:28pm UTC](https://forum.sienci.com/t/robb-smiths-parametric-finger-jointed-box/4774/3 "2022-09-08T22:28:07Z")

</div>

OMG! Someone else uses OpenSCAD! It’s awesome!
