# Settings Backup

**URL:** <https://forum.sienci.com/t/settings-backup/6178>\
**Category:** 💡 Suggestion\
**Created:** [June 30, 2022, 3:04pm UTC](https://forum.sienci.com/t/settings-backup/6178 "2022-06-30T15:04:09Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AutoDoc](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/e480ec/32.png) [@AutoDoc](https://forum.sienci.com/u/AutoDoc)\
**Post date:** [June 30, 2022, 3:04pm UTC](https://forum.sienci.com/t/settings-backup/6178/1 "2022-06-30T15:04:09Z")

</div>

I’m new to gSender and today, I wanted to backup all my stuff (settings and macros) in the installation. I hit the settings backup button, and when I looked through the JSON, I saw the toolchange hook g-code, but there was nothing for my start and stop g-code. Am I missing something here? That stuff should be in the backup JSON, right?

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [August 2, 2022, 2:40pm UTC](https://forum.sienci.com/t/settings-backup/6178/2 "2022-08-02T14:40:36Z")

</div>

This feature will be added in an upcoming release. Settings are stored in a different place than macros/start or stop events and so were originally excluded since a settings reset wouldn’t remove the others.

---

<div class="post-metadata">

**Author:** ![AutoDoc](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/e480ec/32.png) [@AutoDoc](https://forum.sienci.com/u/AutoDoc)\
**Post date:** [August 2, 2022, 6:38pm UTC](https://forum.sienci.com/t/settings-backup/6178/3 "2022-08-02T18:38:06Z")

</div>

Thanks for listening to the channel!

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [October 19, 2022, 1:23pm UTC](https://forum.sienci.com/t/settings-backup/6178/4 "2022-10-19T13:23:53Z")

</div>